When i put in the reverse gear i hear a long beeeeep for maybe 5-6 seconds and then it stops, and then nothing.....
Nothing on any display and no beep beep beep
What is wrong?
Peugeot 307CC 2004
Peugeot 307CC parkingsensor problem
Moderator: RichardW
-
OnlineGiveMeABreak
- Forum Admin Team
- Posts: 37434
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5742
Re: Peugeot 307CC parkingsensor problem
1) You may already be parked up to an object within the red proximity alert, causing the continuous beep when hitting reverse
2) You may have one or more faulty sensors
3) There may be a fault in the parking assistance ECU. As has happened to me previously, check in the boot area (rear left hand side of the trunk area) to make sure you haven't spilled any liquid from a container that has penetrated the parking assistance ECU. My screen wash emptied 3 litres into my boot and I wasn't aware of it until my ECU started playing up. It was entirely soaked in blackberry smelling purple screen wash and it took a week to clean and dry it out.
If there is no spill, or obvious damage to wiring on the unit, then you need to get it diagnose with Diagbox. It will be able to tell you if there is a fault and if it is a sensor or sensors, which ones.
2) You may have one or more faulty sensors
3) There may be a fault in the parking assistance ECU. As has happened to me previously, check in the boot area (rear left hand side of the trunk area) to make sure you haven't spilled any liquid from a container that has penetrated the parking assistance ECU. My screen wash emptied 3 litres into my boot and I wasn't aware of it until my ECU started playing up. It was entirely soaked in blackberry smelling purple screen wash and it took a week to clean and dry it out.
If there is no spill, or obvious damage to wiring on the unit, then you need to get it diagnose with Diagbox. It will be able to tell you if there is a fault and if it is a sensor or sensors, which ones.
Please Don't PM Me For Technical Help
Marc
Marc