406 est (s reg) anti roll bar links, HELP

This is the Forum for all your Peugeot Technical Questions, Problems or Advice.
biggee2003
Posts: 2
Joined: 31 May 2005, 19:00

406 est (s reg) anti roll bar links, HELP

Unread post by biggee2003 »

Hi first time poster here, i have tried searching to no avail.
knocking happening in front when i go over bumps. i have come to the conclusion that it is likely to be front anti roll bar links.
My question is....
How difficult are they to replace? can i do this if the cat is parked on the road? Is it as simple as unding the two bolts removal and replacement[?]
Thanks in advance,
Nick.
PowerLee
Posts: 1260
Joined: 01 May 2004, 19:49
x 1

Unread post by PowerLee »

Hi
Yes it is just a bolt at each end of the link, Im not sure if its possible with the wheel still on the car though.
A simple job for once on a Peugeot.
pug_owner2002
Posts: 288
Joined: 27 Feb 2005, 21:05
x 3

Unread post by pug_owner2002 »

If it's the same as doing it on the 306 I would say that the wheel would need to come off to give you the space to work with.
biggee2003
Posts: 2
Joined: 31 May 2005, 19:00

Unread post by biggee2003 »

Thanks Guys, would i need to get any kind of re alignment done afterwards?
arry_b
Posts: 519
Joined: 10 Dec 2002, 15:55

Unread post by arry_b »

Nope.