DS3 Blower Relay Location

This is the Forum for all your DS Automobiles Technical Questions, Problems or Advice.

Moderator: RichardW

antwhiteman
Posts: 2
Joined: 15 Jan 2022, 14:20

DS3 Blower Relay Location

Post by antwhiteman »

Hello All !
My DS3's blower has stopped working.
Fuse good
Resistor changed.
So.... Im thinking relay...

But I cannot find it's location anywhere on the internet !

Anyone help please?


TIA

AW
User avatar
GiveMeABreak
Forum Admin Team
Posts: 38747
Joined: 15 Sep 2015, 19:38
x 6053

Re: DS3 Blower Relay Location

Post by GiveMeABreak »

Check Fuse F11 in the engine compartment fuse box which tends to be the one for the blower. You can't access the relays as it is internal to the engine fusebox, but F11 tends to be the fuse on DS3 Petrol engines. I would actually replace it rather than visually checking it as they can fail without visible signs.
Please Don't PM Me For Technical Help

Marc
antwhiteman
Posts: 2
Joined: 15 Jan 2022, 14:20

Re: DS3 Blower Relay Location

Post by antwhiteman »

Marc
Thanks for the prompt reply.
I've checked fuse F11 visually and also with a meter. It is good.

How would a faulty relay be changed then? Garage?

Thanks again.
AW
User avatar
GiveMeABreak
Forum Admin Team
Posts: 38747
Joined: 15 Sep 2015, 19:38
x 6053

Re: DS3 Blower Relay Location

Post by GiveMeABreak »

No - it would be a new fusebox if it was the relay.

There are no user-serviceable parts in these as they are sealed. So double check you don't have a dodgy heater blower control module.
6441S7.jpg
If you have the automatic air conditioning, and if you bought a cheap one from ebay or Amazon or unbranded one from elsewhere, then expect it to possibly be a dud. We get many of those here. Aim for a branded part if you can.
Please Don't PM Me For Technical Help

Marc
Gmann
Posts: 3
Joined: 16 Feb 2022, 11:20

Re: DS3 Blower Relay Location

Post by Gmann »

Hi
Just had the same problem with my Ds3 tested the blower motor faulty.
Easy change remove glovebox it's just above the resistor one screw pull small tab and twist and remove.
Help this helps pal
Gmann391