My Camshaft belt broke whilst driving.
The pick up guy said it might be a non-interference engine, but didn't think so.
Stuck and need to know whether it's worth getting the car fixed or scrapped.
Less than 80K on the clock.
been a nice little runner until now....
Petro engine.
2006 plate C3 Desire Is it a Non interference engine?
Moderator: RichardW
-
- Donor 2023
- Posts: 13727
- Joined: 01 Apr 2012, 09:47
- Location: Reading
- My Cars: C5 Mk2 VTX+ estate.
- x 2993
Re: 2006 plate C3 Desire Is it a Non interference engine?
Hi, and to the Forum (even if it is for such a terrible reason). It may be possible to repair the engine.
James
ex BX 1.9
ex Xantia 2.0HDi SX
ex Xantia 2.0HDi LX
Ex C5 2.0HDi VTR
Ex C5 2.0HDi VTR
C5 2.2HDi VTX+
Yes, I am paranoid, but am I paranoid ENOUGH?
Out amongst the stars, looking for a world of my own!
ex BX 1.9
ex Xantia 2.0HDi SX
ex Xantia 2.0HDi LX
Ex C5 2.0HDi VTR
Ex C5 2.0HDi VTR
C5 2.2HDi VTX+
Yes, I am paranoid, but am I paranoid ENOUGH?
Out amongst the stars, looking for a world of my own!
-
- Donor 2023
- Posts: 2625
- Joined: 24 May 2007, 10:11
- Location: poole dorset uk
- Lexia Available: Yes
- My Cars: C5 X7 2009 2.0 HDI VF7**************[VIN obfuscated, can be read by forum staff]
C4 2010 2.0 HDi Exclusive VF7**************[VIN obfuscated, can be read by forum staff] - x 378
Re: 2006 plate C3 Desire Is it a Non interference engine?
Welcome and most of us here found the Forum because we needed help
As James says post your Vin number up and it will look like mine to the left of this post, only Admins can see it.
Worst case scenario you would need a new engine or a rebuild, only you can decide if the car is worth it to you spending that sort of money which you would probably not get back but as you say its been a nice runner up till now then i would probably get a quote for the cost of any work needed, get a quote for the scrap value of the car and then work out what you can afford to spend to replace it.
Say its £600 to get a replacement engine supplied and fitted but scrap value is say £250 what would you get for £850 + any funds you have if that makes sense.
Colin
As James says post your Vin number up and it will look like mine to the left of this post, only Admins can see it.
Worst case scenario you would need a new engine or a rebuild, only you can decide if the car is worth it to you spending that sort of money which you would probably not get back but as you say its been a nice runner up till now then i would probably get a quote for the cost of any work needed, get a quote for the scrap value of the car and then work out what you can afford to spend to replace it.
Say its £600 to get a replacement engine supplied and fitted but scrap value is say £250 what would you get for £850 + any funds you have if that makes sense.
Colin
- GiveMeABreak
- Forum Admin Team
- Posts: 37005
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5646
Re: 2006 plate C3 Desire Is it a Non interference engine?
If this is a TU3 engine then it is an interference engine - most manufacturers don't make non-interference engines because of the efficiencies required to meet ongoing emissions standards.johead wrote: ↑26 Dec 2021, 09:43 My Camshaft belt broke whilst driving.
The pick up guy said it might be a non-interference engine, but didn't think so.
Stuck and need to know whether it's worth getting the car fixed or scrapped.
Less than 80K on the clock.
been a nice little runner until now....
Petro engine.
So you may well have bent valves and bent con rods....
Please Don't PM Me For Technical Help
Marc
Marc
-
- Posts: 371
- Joined: 29 May 2012, 21:37
- Location: London near that big building with the flashing light!
- My Cars: 2001 Xsara Picasso 2.0 HDi
- x 8
Re: 2006 plate C3 Desire Is it a Non interference engine?
Don't forget the car replacement price is sky high so 06 could be valued at double what you think
If able have valve cover off see if followers etc broke as some they break there rather than more internal mayhem, then remove head you see if valves bent plus tops of pistons if pistons look ok ie no holes or damage if can get a Depth/run out dial from somewhere often magnet base which you sit on block then measure difference between pistons top height if out by more than tolerances say will be a bent rod.
Getting conrods etc replaced on them could be a short block as much of powertrain engines who make PSA/Fords/Fiat/Lancia/Mini/Suzuki and others build engines with sheer bolts so can't be undone as want to sell heads or blocks only and no spares.
If able have valve cover off see if followers etc broke as some they break there rather than more internal mayhem, then remove head you see if valves bent plus tops of pistons if pistons look ok ie no holes or damage if can get a Depth/run out dial from somewhere often magnet base which you sit on block then measure difference between pistons top height if out by more than tolerances say will be a bent rod.
Getting conrods etc replaced on them could be a short block as much of powertrain engines who make PSA/Fords/Fiat/Lancia/Mini/Suzuki and others build engines with sheer bolts so can't be undone as want to sell heads or blocks only and no spares.