Nearside sliding door doesn’t unlock
Moderator: RichardW
-
Ladyvandriver
- Posts: 1
- Joined: 30 Jul 2021, 08:54
- Location: Bedfordshire
- My Cars: Citroen Dispatch 2017
Nearside sliding door doesn’t unlock
I’m hoping someone can enlighten me. My nearside sliding door doesn’t unlock with my key fob. I can hear the click when the van locks but when I unlock the van that sliding door doesn’t make any sound to unlock.
-
GiveMeABreak
- Forum Admin Team
- Posts: 37302
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5712
Re: Nearside sliding door doesn’t unlock
Hi and welcome.
This may be the 'selective' locking feature. It is used to protect access to parts of the van you may not be present in.
The options are either total unlocking of the van or only the side and rear doors (keeping the cab locked).
Look for this button on the dash somewhere:
You can toggle the modes by:
Turning the ignition on and pressing this button for more than 2 seconds - the light will come on to show you have selective locking enabled.
Repeat the operation (the light on the button will switch off) to return to full vehicle unlocking.
If it's not this and you have full locking enabled, then there may well be a fault - possibly with one of the contacts on the side door that will need looking at / further investigation.
This may be the 'selective' locking feature. It is used to protect access to parts of the van you may not be present in.
The options are either total unlocking of the van or only the side and rear doors (keeping the cab locked).
Look for this button on the dash somewhere:
Turning the ignition on and pressing this button for more than 2 seconds - the light will come on to show you have selective locking enabled.
Repeat the operation (the light on the button will switch off) to return to full vehicle unlocking.
If it's not this and you have full locking enabled, then there may well be a fault - possibly with one of the contacts on the side door that will need looking at / further investigation.
Please Don't PM Me For Technical Help
Marc
Marc