I’m trying to activate the AUX input on my radio with Lexia.
Problem is that as soon as I go in to the radio to configure it, I just get a blank line. Any clues why?
Activation of AUX on C5 radio
Moderator: GiveMeABreak
- GiveMeABreak
- Forum Admin Team
- Posts: 37014
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5648
Re: Activation of AUX on C5 radio
When you ran the global test, was there an ECU for the RD4 or just Autoradio? Which system do you have fitted?
Is Lexia picking up all the other detected ECUs?
Is Lexia picking up all the other detected ECUs?
Please Don't PM Me For Technical Help
Marc
Marc
Re: Activation of AUX on C5 radio
The radio says Blaupunkt RD4 on a label, but lexia only said Radio when running global test. In total it found 10 ECUs if I’m not mistaken…
- GiveMeABreak
- Forum Admin Team
- Posts: 37014
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5648
Re: Activation of AUX on C5 radio
Ok, so without getting the main menu up for the ECU,. you are not going to get into the configuration screen. Maybe your VCI is a revision B and not fully CAN compliant with missing hardware. The cheaper Chinese clones did cut-down versions that have issues with the C5. If the VCI can't communicate with the some ECUs that may be where your problem lies. Are you using Diagbox which launches Lexia automatically, or a native Lexia only installation? If Diagbox, what version of software are you on?
Please Don't PM Me For Technical Help
Marc
Marc