Multiplexed additive adding pump can network fault

This is the Forum for all your Peugeot Technical Questions, Problems or Advice.

Moderator: RichardW

Post Reply
Bouncy
Posts: 7
Joined: 02 Aug 2018, 23:27
Location: Belfast
My Cars: Peugeot 3008

Multiplexed additive adding pump can network fault

Post by Bouncy »

Hello, im looking a little help I getting this fault along with code p1345 I have had the dpf tank out and check see if there was fluid in the thank its over half full I also check the pump with a 12v battery and it looks to be working fine I have also check the wiring loom from the plug upto the fuel tank and can't see a problem with it any ideas what else i could look for ?
Top
wheeler
Posts: 6885
Joined: 21 Sep 2002, 19:07
Location: United Kingdom
My Cars:
x 730

Re: Multiplexed additive adding pump can network fault

Post by wheeler »

Not sure of the exact set up on the 3008 but i have replaced quite a few additive tanks on Experts & Berlingos for the pump fault. Does the tank have a 3 pin plug?
Top
User avatar
Dormouse
(Donor 2022)
Posts: 2010
Joined: 15 Apr 2021, 14:32
Location: Kingdom of Fife
My Cars: Peugeot 3008 Hybrid4, Fiat Ducato, Morris Mini.
plus notable cars I have owned :- Studebaker 1921, Daimler Consorts, Mercedes 220 Pontoon, Simca 1301, Austin Metropolitan, lots and lots of Minis, both steel and fibreglass bodied, Fiat 500F, Citroen GSA's, Skoda Estelle 120 Rally replica, DKW 1000S, Triumph Herald Estate, Warwick GT (very briefly)
x 666

Re: Multiplexed additive adding pump can network fault

Post by Dormouse »

Are there an other codes along with P1345?
Top
Post Reply

Return to “Peugeot”