Had to take both hub carriers off to crack the (probably original) bearings and hit one with the angle grinder, it just laughed at the lump hammer and cold chisel, bit of welding on the lower rear sill which i will tidy up later and a new wiper blade(yes I forgot to check it) and got it back today.
Xantia passed it's MOT
-
peter306
- Posts: 197
- Joined: 11 Nov 2013, 12:44
- x 60
Xantia passed it's MOT
After renewing both lower steering bearings, drop links and the new ABS sensor that i buggered doing one of the bearings my Xantia has another year of life
Had to take both hub carriers off to crack the (probably original) bearings and hit one with the angle grinder, it just laughed at the lump hammer and cold chisel, bit of welding on the lower rear sill which i will tidy up later and a new wiper blade(yes I forgot to check it) and got it back today.
Had to take both hub carriers off to crack the (probably original) bearings and hit one with the angle grinder, it just laughed at the lump hammer and cold chisel, bit of welding on the lower rear sill which i will tidy up later and a new wiper blade(yes I forgot to check it) and got it back today.
Citroen GSA flat4 engine written off
Citroen BX 1.4 gone
Citroen BX 1.6 gone
Citroen Xantia 1.8 gone
Citroen Xantia 1.8 still living now 148 k
Citroen BX 1.4 gone
Citroen BX 1.6 gone
Citroen Xantia 1.8 gone
Citroen Xantia 1.8 still living now 148 k
-
CitroJim
- A very naughty boy
- Posts: 54623
- Joined: 30 Apr 2005, 23:33
- x 8111
-
Rhothgar
- (Donor 2026)
- Posts: 2432
- Joined: 22 Nov 2004, 00:21
- x 225
Re: Xantia passed it's MOT
That's two of us! Well almost!