Hi,
I have just bought a DS5 and wasn't able to find one with the HUD fitted but it looks like they are relatively cheap online. However, is it even possible to retrofit a unit onto a car not originally spec'd with one? Are there more alterations that would have to be made?
Thanks, obviously new to the world of big French cars so any help would be greatly appreciated!
Thanks!
Retrofitting HUD to a DS5
Moderator: RichardW
- GiveMeABreak
- Forum Admin Team
- Posts: 37389
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5739
Re: Retrofitting HUD to a DS5
They were originally only fitted to the DS Sport with the Citroen badged versions. They were basically unchanged under DS apart form some styling and equipment changes.
It's unlikely you will have the correct fascia wiring harness to support the system as there are a considerable number of harnesses available depending on equipment, trim and options. Then there will be the correct configuration of the BSI and associated ECUs.
It's unlikely you will have the correct fascia wiring harness to support the system as there are a considerable number of harnesses available depending on equipment, trim and options. Then there will be the correct configuration of the BSI and associated ECUs.
Please Don't PM Me For Technical Help
Marc
Marc