Drivers seat 206

This is the Forum for all your Peugeot Technical Questions, Problems or Advice.

Moderator: RichardW

Post Reply
Foxies
Posts: 6
Joined: 14 Dec 2020, 16:38
Location: Bridgwater
My Cars: Peugeot 206

Drivers seat 206

Post by Foxies »

Hi just taken out my drivers seat on my 206 2004 because it was not locking on one side when moving back and forward. I found this piece in the runner ( picture below) it looks intact but I don't know how it fits can anyone help. Thanks for looking.
Screenshot_20210109_192252.jpg
User avatar
Paul-R
Donor 2023
Posts: 6916
Joined: 07 May 2009, 16:24
Location: Wirral, NW England; Vaucluse 84, France
Lexia Available: Yes
My Cars: 2015 1.6 Blue HDi 120 Peugeot 308 Active SW
2013 2.0 HDi 163 C5 Exclusive Tourer
2003 2.0 HDi 110 C5 Exclusive Estate (Gone)
2001 2.0 HDi 90 Xsara Estate (Gone)
x 1369

Re: Drivers seat 206

Post by Paul-R »

Been some time since I took the seats out of our old Xsara but that looks like the clip that goes on to the wire frame and then holds a wiring loom in position. Could easily be wrong though.
As I get older I think a lot about the hereafter - I go into a room and then wonder what I'm here after.

Inside every old person is a young person wondering what the hell happened.

"Trying is the first step towards failure" ~ Homer J Simpson​
User avatar
GiveMeABreak
Forum Admin Team
Posts: 37005
Joined: 15 Sep 2015, 19:38
Location: West Wales
My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow
x 5646

Re: Drivers seat 206

Post by GiveMeABreak »

I can only think that it may be off the side of the seat rails - where the grab bar is lifted to slide the seat back - if you follow the bar under the seat it will attach to each side of the rails. There does seem to be some sort of attachment mechanism but the available images are too small to match it to the picture.

That picture would seem to have a metal pin inside the fixing - has the bar on your seat broken off or is it loose on one side? Has it sheared off from the metal pin in the picture?
Please Don't PM Me For Technical Help

Marc
Post Reply