Hydraulic hose connected to the rear height adjustment valve

This is the Forum for all your Citroen Technical Questions, Problems or Advice.

Moderator: RichardW

navid
New User
Posts: 1
Joined: 07 Jan 2021, 20:21

Hydraulic hose connected to the rear height adjustment valve

Post by navid »

dear sir
I am writing the letter to get some information.i would be grateful if you help me.There is a forty cm wire in the hydraulic pipe connected to the Xantia sx 2000 cc ‌suspension rear height adjustment valve.What is ‌‌ the reason of using this wire?
your faithfully.

User avatar
KennyW
Donor 2020
Posts: 2079
Joined: 17 Jan 2006, 22:22
x 55

Re: Hydraulic hose connected to the rear height adjustment valve

Post by KennyW »

Yes , the wire is inside the hydraulic pipe, I think is there to reduce the amount of lhm fluid flowing through the pipe thus increasing the pressure.

When I replaced the pipe with no wire and I didn't notice any difference in the hydraulics.

Kenny

Online
Hell Razor5543
NOT Alistair or Simon
Posts: 11353
Joined: 01 Apr 2012, 09:47
x 1256

Re: Hydraulic hose connected to the rear height adjustment valve

Post by Hell Razor5543 »

Somebody (I think it was Mandrake) suggested that the wire might help smooth out the fluid flow, eliminating the pulses generated by the LHM pump.