ESP add / activation Jumpy 2013

This is the Forum for all your Citroen Technical Questions, Problems or Advice.

Moderator: RichardW

Post Reply
kaupz
Posts: 2
Joined: 12 Dec 2020, 17:38
Location: Estonia
My Cars: Citroen Jumpy 2013 8seater 94kw manual climate

ESP add / activation Jumpy 2013

Post by kaupz »

Just bought used 8-seater Jumpy and now realised that ESP button is missing :(
can it be acticated with Lexia?
Some sensors need to add?

2.0 94kW Webasto, solar windscreen, parking sensors, Climate control, factory alarm and no ESP ?? at 2013 :D welcome to Estonia.
wheeler
Posts: 6849
Joined: 21 Sep 2002, 19:07
Location: United Kingdom
My Cars:
x 718

Re: ESP add / activation Jumpy 2013

Post by wheeler »

If it wasn't fitted at the factory the minimum you would need to add is a new ESP type ABS block, a steering angle sensor & a yaw sensor. That's assuming all the wiring is present.
Unfortunately you cant just fit the button and activate it.
kaupz
Posts: 2
Joined: 12 Dec 2020, 17:38
Location: Estonia
My Cars: Citroen Jumpy 2013 8seater 94kw manual climate

Re: ESP add / activation Jumpy 2013

Post by kaupz »

ABS pump code is Bosch 0265232065 on the car
and google gives answers that it is also used for ESP ?

Yaw Rate Sensor location I can not find, to check if there is wiring ready.
Online
User avatar
GiveMeABreak
Forum Admin Team
Posts: 37014
Joined: 15 Sep 2015, 19:38
Location: West Wales
My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow
x 5648

Re: ESP add / activation Jumpy 2013

Post by GiveMeABreak »

The Accelerometer sensor is usually fitted in the front centre area of the vehicle under the front centre console gearbox. Although the gear shift may be mounted on the dash, the Yaw sensor is usually near the location of the gear shift near the floor.

As for the ABS / ESP pumps, it is the ECU fitted on these and the software they incorporate that you also need to be concerned about, but will also need to make sure all the associated systems and ECUs and software are compatible as well as the programming. Not something I would tackle to be honest.
Please Don't PM Me For Technical Help

Marc
Post Reply