Fuel sender locking ring

[KennyW]

Hi All,

Looking for any tips or suggestions on refitting ring as it keeps jumping off the thread.

No obvious damage to ring or tank.

I do have new ring and seal on route with 2nd spare ring available.

Kenny

[Rhothgar]

Hi Kenny

Screw it anticlockwise first whilst pressing down fairly firm until it clicks and then screw on clockwise as normal

I had a right mare with mine recently and actually thought I'd cross-threaded it somehow. The plastic thread is too coarse to cross-thread IMHO.

Stick with it! Good luck. Let us know how you get on.

[KennyW]

Thanks R will do.

[admiral51]

Assuming its the Xantia then i found an extra pair of hands really helped when i did mine. Have the other person so push down on the pump itself and you then have 2 hands and eyes to focus on the seal and the ring itself.
In days gone by i would have been happy to supply you my helper but it seems Sons now think they have rights etc etc

[KennyW]

It's the C5 X 7 but The set up is very similar.

My son has decided to work in Leamington Spa, but fortunately I've got a good neighbour.

[KennyW]

Ring fitted and sender all connected.

Roger's tip certainly helped and aligned the ring up correctly.

Thanks Roger,

Kenny

[Rhothgar]

No problem Kenny.

Glad it was of assistance even though I just assumed it was a Xantia because of your profile photo...

[admiral51]

Congrats Kenny