Injector torque 508 sw

This is the Forum for all your Peugeot Technical Questions, Problems or Advice.

Moderator: RichardW

Post Reply
Wikkiwik
Posts: 3
Joined: 28 Aug 2020, 16:27
Location: Nordland
My Cars: Peugeot 508 sw

Injector torque 508 sw

Post by Wikkiwik »

Hei!
I've just replaced one injector on my 508sw 2011 model 115hp. How much tightening torque do i need on the injector holder/forks?
Attachments
Fork
Fork
User avatar
GiveMeABreak
Forum Admin Team
Posts: 37005
Joined: 15 Sep 2015, 19:38
Location: West Wales
My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow
x 5646

Re: Injector torque 508 sw

Post by GiveMeABreak »

Pop your VIN up so I can determine the correct settings for your specific engine
Please Don't PM Me For Technical Help

Marc
Wikkiwik
Posts: 3
Joined: 28 Aug 2020, 16:27
Location: Nordland
My Cars: Peugeot 508 sw

Re: Injector torque 508 sw

Post by Wikkiwik »

VF3**************[VIN obfuscated, can be read by forum staff]
User avatar
GiveMeABreak
Forum Admin Team
Posts: 37005
Joined: 15 Sep 2015, 19:38
Location: West Wales
My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow
x 5646

Re: Injector torque 508 sw

Post by GiveMeABreak »

Pre-tighten to 0.7 daNm
Then Angular tighten to 80°
Please Don't PM Me For Technical Help

Marc
Wikkiwik
Posts: 3
Joined: 28 Aug 2020, 16:27
Location: Nordland
My Cars: Peugeot 508 sw

Re: Injector torque 508 sw

Post by Wikkiwik »

Fantastic! Thank you
Post Reply