Has anyone a vgate maxiscan? Is it any good.
Car is a 2012 c3 picasso 1.6 hdi.
Cheers Steve.
Scanner
Moderator: RichardW
-
- Posts: 2
- Joined: 30 Jul 2020, 16:41
- Location: Hullbridge Essex.
- My Cars: Citroen c 3 picasso 1.6 hdi.
- GiveMeABreak
- Forum Admin Team
- Posts: 37005
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5646
Re: Scanner
Most people here use Diagbox, which is the proprietary software along with the Actia VCI for their PSA vehicles.
Please Don't PM Me For Technical Help
Marc
Marc
- Paul-R
- Donor 2023
- Posts: 6916
- Joined: 07 May 2009, 16:24
- Location: Wirral, NW England; Vaucluse 84, France
- Lexia Available: Yes
- My Cars: 2015 1.6 Blue HDi 120 Peugeot 308 Active SW
2013 2.0 HDi 163 C5 Exclusive Tourer
2003 2.0 HDi 110 C5 Exclusive Estate (Gone)
2001 2.0 HDi 90 Xsara Estate (Gone) - x 1369
Re: Scanner
I can honestly say I've never heard of a vgate maxiscan so had to Google for it. According to one seller it "Only Detects Engine Faults" so wouldn't be any good for all the other ECUs on the car. I'd be doubtful if it could get deep down and dirty even with engines - could it code in a new injector for instance?
As Marc says, most of us here use Diagbox with Actia which, to get a decent one, will cost over £100. Be careful if you find ones significantly cheaper as you need an interface which is "full chip" and has "Rev C" firmware. One supplier, Easydiagnostics, offers regular members here (you may not yet qualify as one of those) a discount if you follow the instructions here viewtopic.php?t=60112
As Marc says, most of us here use Diagbox with Actia which, to get a decent one, will cost over £100. Be careful if you find ones significantly cheaper as you need an interface which is "full chip" and has "Rev C" firmware. One supplier, Easydiagnostics, offers regular members here (you may not yet qualify as one of those) a discount if you follow the instructions here viewtopic.php?t=60112
As I get older I think a lot about the hereafter - I go into a room and then wonder what I'm here after.
Inside every old person is a young person wondering what the hell happened.
"Trying is the first step towards failure" ~ Homer J Simpson
Inside every old person is a young person wondering what the hell happened.
"Trying is the first step towards failure" ~ Homer J Simpson