diagbox which version ??

This is the place for all your Diagnostic related questions or advice.

Moderator: RichardW

Post Reply
t595
Posts: 5
Joined: 05 Jul 2020, 18:57
Location: south yorkshire
My Cars: Citroen Relay

diagbox which version ??

Post by t595 »

hi im looking for advice on what version diagbox to install up to ?
looked through the version change log on here and the relay euro 5 gets a lots of mentions
the vans a 2012 euro 5 engine
User avatar
GiveMeABreak
Forum Admin Team
Posts: 36996
Joined: 15 Sep 2015, 19:38
Location: West Wales
My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow
x 5644

Re: diagbox which version ??

Post by GiveMeABreak »

I would stick to 7.57 / 7.58 as these are stable versions and cover vehicles up to Oct / Nov 2014. Don't forget that you may also need the S1279 add-on module. This is the additional module that goes inline between the VCI and the diagnostic port to be able to communicate with some passenger vehicles and most of the commercials with any Fiat / Ford influence. You can always try without it and if it will read all the ECUs then great, if not, you may need the add-on.
Please Don't PM Me For Technical Help

Marc
t595
Posts: 5
Joined: 05 Jul 2020, 18:57
Location: south yorkshire
My Cars: Citroen Relay

Re: diagbox which version ??

Post by t595 »

cheers for the info , ive installed up to 7.57 , tried to connect no luck currently waiting for the S1279 to arrive
User avatar
GiveMeABreak
Forum Admin Team
Posts: 36996
Joined: 15 Sep 2015, 19:38
Location: West Wales
My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow
x 5644

Re: diagbox which version ??

Post by GiveMeABreak »

Pop up your VIN, just so I can see what version of Relay you have - there are stacks of combos of these. It's also important to make sure you have a full chip Lexia kit of you have a later van with CAN mutliplexing. Sometimes a connection issue can be becasue of the cheaper kit, or may be an installation or communication issue.
Please Don't PM Me For Technical Help

Marc
t595
Posts: 5
Joined: 05 Jul 2020, 18:57
Location: south yorkshire
My Cars: Citroen Relay

Re: diagbox which version ??

Post by t595 »

vin VF7**************[VIN obfuscated, can be read by forum staff] im waiting for the S1279 to arrive , if i have issues connecting
plan A was trying to find someone local with a working set up
or plan B a search on ebay a seller 30 miles away offering to let me collect , [seems legit and knowledgeable in his adverts] take van and pc to him
User avatar
GiveMeABreak
Forum Admin Team
Posts: 36996
Joined: 15 Sep 2015, 19:38
Location: West Wales
My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow
x 5644

Re: diagbox which version ??

Post by GiveMeABreak »

Ok, so yours is a 2012 Jumper III (badged Relay III in the UK), so will likely need the module to properly read some of the ECUs.
Please Don't PM Me For Technical Help

Marc
Post Reply