Engine timing failed & fixed but lots of problem after

This is the Forum for all your Citroen Technical Questions, Problems or Advice.

Moderator: RichardW

Post Reply
User avatar
TodiCroitor
Posts: 64
Joined: 06 Jun 2016, 08:43
Location: Romania
My Cars: C5 1.6 Hdi vtr+ 2009
x 3

Engine timing failed & fixed but lots of problem after

Post by TodiCroitor »

Hi guys,
I’ll try to keep this post short and if needed I’ll update with more details.

Long story short, I didn’t change the engine timing when I supposed to do and I failed me while driving. I sent the car to service auto and they fixe it but something happened cause now It does a lot of problems and they can’t figure it out.

Attached there is 2 pictures with the error codes
00A15117-9250-4413-969E-4A2AC8A33F1A.jpeg
DC44C55F-3BF2-4512-9D34-2BC1FC48D0CD.jpeg
They managed to start the car but after 2-3min it stops.
After the change of the rail fuel pressure sensor (after the engine starts instead of 300bar it goes all the way up to 1500 :O and the car stops because of the high pressure ) the ECU engine error appears and said that there is no start authorizations.
It seems that there is a problem with start authorization but after they fix it it reappears the supply problem.

Any ideas?
Post Reply