Test, low temp solder wire connectors with heat shrink

This is the place for posts that don't fit into any other category.

Moderator: RichardW

Post Reply
User avatar
Stickyfinger
(Donor 2016)
Posts: 10411
Joined: 28 Mar 2013, 21:05
Location: Somset my lovleee
My Cars: Xantia V6 ACTIVA 3ltr 24v Manual p1
Xm 2.1TD Ph2 Exclusive
AX, little Daffodil
SAXO White Mk1. Sally
x 1280
Contact:

Test, low temp solder wire connectors with heat shrink

Post by Stickyfinger »

Alasdair
Activa, the Moose Rider
3x C5x7 Steering racks and counting
User avatar
white exec
Moderating Team
Posts: 7445
Joined: 21 Dec 2015, 12:46
Location: Sayalonga, Malaga, Spain
My Cars: 1996 XM 2.5TD Exclusive hatch RHD
1992 BX19D Millesime hatch LHD
previously 1989 BX19RD, 1998 ZX 1.9D auto, 2001 Xantia 1.8i auto
and lots of Rovers before that: 1935 Ten, 1947 Sixteen, 1960 P5 3-litre, 1966 P6 2000, 1972 P6 2000TC, and 1975 P6B 3500S
x 1752

Re: Test, low temp solder wire connectors with heat shrink

Post by white exec »

Handy at the roadside, if you've remembered to bring your 12v heat-gun with you!
Chris
User avatar
mickthemaverick
Donor 2024
Posts: 13523
Joined: 11 May 2019, 17:56
Location: Hertford
My Cars: 70+ former cars (list available) including 11 Citroens, 3 Renaults
Current cars: 2004 Subaru Legacy 2.5 SEn, 1994 Mazda MX3
x 6011

Re: Test, low temp solder wire connectors with heat shrink

Post by mickthemaverick »

One of those quite interesting ideas that may be handy but for temp repairs chocolate block and tape is far more versatile and probably a lot cheaper!! Then when you get home a proper solder joint with traditional heatshrink is clearly a better permanent repair. :)
I used to be indecisive, now I'm not so sure!
I used to ride on two wheels, but now I need all four!
User avatar
myglaren
Forum Admin Team
Posts: 25367
Joined: 02 Mar 2008, 13:30
Location: Washington
My Cars: Mazda 6
Ooops.
Previously:
2009 Honda Civic :(
C5, C5, Xantia, BX, GS, Visa.
R4, R11TXE, R14, R30TX
x 4889

Re: Test, low temp solder wire connectors with heat shrink

Post by myglaren »

Why do you need to heat-shrink your butt?
User avatar
mickthemaverick
Donor 2024
Posts: 13523
Joined: 11 May 2019, 17:56
Location: Hertford
My Cars: 70+ former cars (list available) including 11 Citroens, 3 Renaults
Current cars: 2004 Subaru Legacy 2.5 SEn, 1994 Mazda MX3
x 6011

Re: Test, low temp solder wire connectors with heat shrink

Post by mickthemaverick »

Stops SWMBO moaning! :-D
I used to be indecisive, now I'm not so sure!
I used to ride on two wheels, but now I need all four!
User avatar
myglaren
Forum Admin Team
Posts: 25367
Joined: 02 Mar 2008, 13:30
Location: Washington
My Cars: Mazda 6
Ooops.
Previously:
2009 Honda Civic :(
C5, C5, Xantia, BX, GS, Visa.
R4, R11TXE, R14, R30TX
x 4889

Re: Test, low temp solder wire connectors with heat shrink

Post by myglaren »

Pickard.png
Post Reply