no luck and another MOT cancelled..
my spare working ECU didn't make a difference.. interestingly, one of the 5 pins on the MAF is missing! pin 2, looking at above diagram, assuming the MAF is 1310, this cables wonders about but seems to start from the fuse box BF01 - from pin 7..
goodness, electrics..
have some spare MAFs , will get this sorted just pleased the ECU doesn't seem to be the issue..
also have to suspect wiring generally
Boxer 2 TPS
Moderator: RichardW
-
- (Donor 2021)
- Posts: 4625
- Joined: 27 Nov 2005, 19:07
- Location: Kent / Susssex
- My Cars: 2010 C5 X7 2.0 hdi 160 exc auto
MG TF 135
Boxer II 2.2 camper conversion
BMW R1200RT
BMW K1300 R
Honda V F R 800 5thG / MT500 Armstrong - x 39
Re: Boxer 2 TPS
All fixed
whole dash out, repairs to two wires (one throttle wire and another unknown wire) , just below nearside windscreen where most of the looms enters van.
also changed the MAF (at Idle a working MAF appears to show about 225g/m, plugging in any non-working, or not having a MAF seems to default to about 500g/m)
Mouse attack!
https://photos.google.com/share/AF1QipN ... F6ODktN3Zn
whole dash out, repairs to two wires (one throttle wire and another unknown wire) , just below nearside windscreen where most of the looms enters van.
also changed the MAF (at Idle a working MAF appears to show about 225g/m, plugging in any non-working, or not having a MAF seems to default to about 500g/m)
Mouse attack!
https://photos.google.com/share/AF1QipN ... F6ODktN3Zn