Peugeot 3008 Hybrid RT6 not booting.

This unit is the eMyWay system, also referred to as RT6, RNEG2, or WIPNAV+ for the Peugeot platform and made by Magneti Marelli.
Main Features: The eMyWay colour satellite navigation has high resolution mapping, Bluetooth Telephone & Audio Streaming supported profiles, USB support for Media files & CD

Moderator: GiveMeABreak

AlamSAsif
(Donor 2020)
Posts: 37
Joined: 27 Feb 2020, 23:18
Location: Manchester, UK.
My Cars: Peugeot 3008 Diesel Hybrid 2013.
x 1

Re: Peugeot 3008 Hybrid RT6 not booting.

Post by AlamSAsif »

At the moment the version of my interface is 4.3.3 and I am using diagbox 7.57. The diagbox is unable to detect the VIN. Please help me sort this out.
Attachments
20200405_162824.jpg
User avatar
GiveMeABreak
Forum Admin Team
Posts: 36996
Joined: 15 Sep 2015, 19:38
Location: West Wales
My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow
x 5644

Re: Peugeot 3008 Hybrid RT6 not booting.

Post by GiveMeABreak »

AlamSAsif wrote: 05 Apr 2020, 13:10 Hi. Received the unit and connected it. It powered on and it keep beeping. Its because of the VIN not configured I think. The firmware is 2.80. I will connect my pc and try to update the VIN code fist and see if it works. Will update after that because I think need more configuration as well because the Hybrid information is not showing on the display. Thanks
Image
Yes - if you have Firmware 2.80 - I strongly suggest you leave it at that! Get all the options working. I would not update it to 2.86 as it is a well known fact that it will reset the Head Unit again and you will be back to square one. It will go into secure mode and will require the dealer (an expensive diagnostic session) or Mirascripts to rectify - as it can't be configured with Diagbox.
Please Don't PM Me For Technical Help

Marc
AlamSAsif
(Donor 2020)
Posts: 37
Joined: 27 Feb 2020, 23:18
Location: Manchester, UK.
My Cars: Peugeot 3008 Diesel Hybrid 2013.
x 1

Re: Peugeot 3008 Hybrid RT6 not booting.

Post by AlamSAsif »

Thanks for your reply. Any suggestion regarding the issue with my diagbox. Thanks
AlamSAsif
(Donor 2020)
Posts: 37
Joined: 27 Feb 2020, 23:18
Location: Manchester, UK.
My Cars: Peugeot 3008 Diesel Hybrid 2013.
x 1

Re: Peugeot 3008 Hybrid RT6 not booting.

Post by AlamSAsif »

Hi. I manage to change the VIN code in new unit using diagbox. Please guide me the other settings I need to put into my car. Thanks.
AlamSAsif
(Donor 2020)
Posts: 37
Joined: 27 Feb 2020, 23:18
Location: Manchester, UK.
My Cars: Peugeot 3008 Diesel Hybrid 2013.
x 1

Re: Peugeot 3008 Hybrid RT6 not booting.

Post by AlamSAsif »

The current settings of donor unit are as follows:
Attachments
Other Functions-2.JPG
Other Functions-1.JPG
Customer Options.JPG
Audio Functions.JPG
User avatar
GiveMeABreak
Forum Admin Team
Posts: 36996
Joined: 15 Sep 2015, 19:38
Location: West Wales
My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow
x 5644

Re: Peugeot 3008 Hybrid RT6 not booting.

Post by GiveMeABreak »

Ok, that's great, leave it with me and I'll sort something out for you in the morning. :)
Please Don't PM Me For Technical Help

Marc
User avatar
GiveMeABreak
Forum Admin Team
Posts: 36996
Joined: 15 Sep 2015, 19:38
Location: West Wales
My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow
x 5644

Re: Peugeot 3008 Hybrid RT6 not booting.

Post by GiveMeABreak »

Actually, had time to scan through and these are the areas I think you need to change:

Preferred SID (Automatic TMC Station): Set to UK
Auxilliary Audio Input: Present
Auxilliary Video Input: Missing / Absent
Video Input from Reverse Camera: Missing / Absent
Parking Aid: Rear Only
Please Don't PM Me For Technical Help

Marc
AlamSAsif
(Donor 2020)
Posts: 37
Joined: 27 Feb 2020, 23:18
Location: Manchester, UK.
My Cars: Peugeot 3008 Diesel Hybrid 2013.
x 1

Re: Peugeot 3008 Hybrid RT6 not booting.

Post by AlamSAsif »

Thanks Marc. Is there any setting for the Hybrid information? In my old unit it shows the Hybrid info when press mode button. It shows the battery charging or not and if car is running on zero emmition. Thanks
User avatar
GiveMeABreak
Forum Admin Team
Posts: 36996
Joined: 15 Sep 2015, 19:38
Location: West Wales
My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow
x 5644

Re: Peugeot 3008 Hybrid RT6 not booting.

Post by GiveMeABreak »

I can't help you with that I'm afraid - there are no obvious options from the areas you posted - but I suspect this data will come from the BSI or one of the specific ECUs that handles the Hybrid element. This would be typical data that is normally updated from PSA's servers, so you may need to bite the bullet on this one and ask them to download the configuration file from your VIN - this should then correct the missing data.
Please Don't PM Me For Technical Help

Marc
AlamSAsif
(Donor 2020)
Posts: 37
Joined: 27 Feb 2020, 23:18
Location: Manchester, UK.
My Cars: Peugeot 3008 Diesel Hybrid 2013.
x 1

Re: Peugeot 3008 Hybrid RT6 not booting.

Post by AlamSAsif »

OK Mark. Thanks for your help. I will see the options in BSI. Thanks Shah
User avatar
GiveMeABreak
Forum Admin Team
Posts: 36996
Joined: 15 Sep 2015, 19:38
Location: West Wales
My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow
x 5644

Re: Peugeot 3008 Hybrid RT6 not booting.

Post by GiveMeABreak »

Ok, good luck.
Please Don't PM Me For Technical Help

Marc
User avatar
Paul-R
Donor 2023
Posts: 6916
Joined: 07 May 2009, 16:24
Location: Wirral, NW England; Vaucluse 84, France
Lexia Available: Yes
My Cars: 2015 1.6 Blue HDi 120 Peugeot 308 Active SW
2013 2.0 HDi 163 C5 Exclusive Tourer
2003 2.0 HDi 110 C5 Exclusive Estate (Gone)
2001 2.0 HDi 90 Xsara Estate (Gone)
x 1369

Re: Peugeot 3008 Hybrid RT6 not booting.

Post by Paul-R »

Slightly off topic - why should the MW have to be deactivated if the vehicle is all electric or hybrid? Could it be because the electric motor and associated electronics pump our so much electronic interference that it would be unusable I wonder?
As I get older I think a lot about the hereafter - I go into a room and then wonder what I'm here after.

Inside every old person is a young person wondering what the hell happened.

"Trying is the first step towards failure" ~ Homer J Simpson​
User avatar
GiveMeABreak
Forum Admin Team
Posts: 36996
Joined: 15 Sep 2015, 19:38
Location: West Wales
My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow
x 5644

Re: Peugeot 3008 Hybrid RT6 not booting.

Post by GiveMeABreak »

AlamSAsif wrote: 08 Apr 2020, 00:26 Thanks Marc. Is there any setting for the Hybrid information? In my old unit it shows the Hybrid info when press mode button. It shows the battery charging or not and if car is running on zero emmition. Thanks
I didn’t mention the AM waveband option also had to be deactivated too - as I thought that was self explanatory in the notes on the right, but Paul reminded me to make sure you set that to deactivated.
Please Don't PM Me For Technical Help

Marc
User avatar
GiveMeABreak
Forum Admin Team
Posts: 36996
Joined: 15 Sep 2015, 19:38
Location: West Wales
My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow
x 5644

Re: Peugeot 3008 Hybrid RT6 not booting.

Post by GiveMeABreak »

Paul-R wrote: 08 Apr 2020, 12:39 Slightly off topic - why should the MW have to be deactivated if the vehicle is all electric or hybrid? Could it be because the electric motor and associated electronics pump our so much electronic interference that it would be unusable I wonder?
Yes Paul - the electromagnetic noise from the electric motor can interfere with the reception, but nothing more clandestine than that. It just creates a lot of static feedback rendering it pretty much useless.
Please Don't PM Me For Technical Help

Marc
AlamSAsif
(Donor 2020)
Posts: 37
Joined: 27 Feb 2020, 23:18
Location: Manchester, UK.
My Cars: Peugeot 3008 Diesel Hybrid 2013.
x 1

Re: Peugeot 3008 Hybrid RT6 not booting.

Post by AlamSAsif »

Thanks Paul and Mark.
Post Reply