Re-install

This is the place for all your Diagnostic related questions or advice.

Moderator: RichardW

Post Reply
User avatar
moizeau
Donor 2024
Posts: 1589
Joined: 12 Jan 2015, 16:08
Location: France 36
My Cars: 91 BX TZD Estate. Dead but loved
407 HDI 136 auto
C4 2l petrol coupé
2010 Dispatch III HDI 90
AND a 1980 Z1000ST
AND a 1983 GPz1100 inj
AND a 1995 Zephyr 1100
AND a 1980 Z650 (my moped)
x 315

Re-install

Post by moizeau »

After all the success with the van the laptop died this morning. Just re-installing diagbox onto a spare. It's up and running but won't automatically update to 7.02, it's stuck on 7.01. Due to this I haven't risked doing the updates to 7.57. Any ideas anyone?
Cheers
Pete
Notice the BX is still top the list but sadly gone
User avatar
GiveMeABreak
Forum Admin Team
Posts: 37339
Joined: 15 Sep 2015, 19:38
Location: West Wales
My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow
x 5723

Re: Re-install

Post by GiveMeABreak »

Once it restarts after initial installation and activation it should auto update to 7.02 Pete.
Please Don't PM Me For Technical Help

Marc
User avatar
moizeau
Donor 2024
Posts: 1589
Joined: 12 Jan 2015, 16:08
Location: France 36
My Cars: 91 BX TZD Estate. Dead but loved
407 HDI 136 auto
C4 2l petrol coupé
2010 Dispatch III HDI 90
AND a 1980 Z1000ST
AND a 1983 GPz1100 inj
AND a 1995 Zephyr 1100
AND a 1980 Z650 (my moped)
x 315

Re: Re-install

Post by moizeau »

Cheers Marc, yeah I read that, I have the original instructions from Jim. 1st attempt wouldn't validate after the installation. I had internet on as per the instructions but when I put the customer code number in from the VCI it didn't work and didn't get to the name / car phone bit. The 2nd time I did exactly the same but plugged in the VCI before I entered the number and all was good, but wouldn't automatically update. I can't remember if the internet was on or off (it was getting late by now). I then just did the update from the disc regardless from 7.01 thinking I probably would have to start again anyway so nothing to lose...and it worked, up to 7.57. Just plugged it in and everything is fine.
Pete
Notice the BX is still top the list but sadly gone
Post Reply