Hi !
i've asked an official Peugeot reseller how much it will cost to replace my timing belt. Answer : 1500 chf (= 1395 eur = 1177 gbp)
It's a little more than my actual budget, so i'll try to do it myself. It's not rocket science if i follow the important security things like the locking of the crank and cam pulleys.
I can build the pins myself with a lathe, but i have to measure the holes first.
So i am asking here if someone has already done that before me, to build the pins necessary for the job, or if i can find this information on the service manual.
Btw, my engine is a EW10J4
Timing belt replacement, crank pin hole diameter
Moderator: RichardW
-
- Posts: 48
- Joined: 21 Jan 2020, 12:29
- x 4
-
- Forum Admin Team
- Posts: 25493
- Joined: 02 Mar 2008, 13:30
- x 4924
Re: Timing belt replacement, crank pin hole diameter
I bet you could drive to Poland, have a bit of a holiday there and have the belt changed all for less than that.
-
- Forum Treasurer
- Posts: 10901
- Joined: 07 Aug 2002, 17:12
- x 1004
Re: Timing belt replacement, crank pin hole diameter
You should be able to buy a set of pins quite cheaply, e.g. here, in the UK
This shows the dimensions of the crank pin:
This shows the dimensions of the crank pin:
Richard W
-
- Forum Admin Team
- Posts: 37456
- Joined: 15 Sep 2015, 19:38
- x 5743
Re: Timing belt replacement, crank pin hole diameter
You might want to do the tensioner rollers too whilst at it.
Please Don't PM Me For Technical Help
Marc
Marc
-
- Posts: 48
- Joined: 21 Jan 2020, 12:29
- x 4
Re: Timing belt replacement, crank pin hole diameter
Thank you all for your precious help !!
Yes Marc i'm buying the whole SKF kit (belt+pump+rollers)
Jackie i will consider your idea about Poland holiday
Yes Marc i'm buying the whole SKF kit (belt+pump+rollers)
Jackie i will consider your idea about Poland holiday
-
- Posts: 48
- Joined: 21 Jan 2020, 12:29
- x 4
Re: Timing belt replacement, crank pin hole diameter
Does the timing belt retaining clip is essential ? or i can use a plastic tie strap to keep it in position ?