Hi !
i've asked an official Peugeot reseller how much it will cost to replace my timing belt. Answer : 1500 chf (= 1395 eur = 1177 gbp)
It's a little more than my actual budget, so i'll try to do it myself. It's not rocket science if i follow the important security things like the locking of the crank and cam pulleys.
I can build the pins myself with a lathe, but i have to measure the holes first.
So i am asking here if someone has already done that before me, to build the pins necessary for the job, or if i can find this information on the service manual.
Btw, my engine is a EW10J4
Timing belt replacement, crank pin hole diameter
Moderator: RichardW
- myglaren
- Forum Admin Team
- Posts: 25463
- Joined: 02 Mar 2008, 13:30
- Location: Washington
- My Cars: Mazda 6
Ooops.
Previously:
2009 Honda Civic :(
C5, C5, Xantia, BX, GS, Visa.
R4, R11TXE, R14, R30TX - x 4920
Re: Timing belt replacement, crank pin hole diameter
I bet you could drive to Poland, have a bit of a holiday there and have the belt changed all for less than that.
-
- Forum Treasurer
- Posts: 10871
- Joined: 07 Aug 2002, 17:12
- Location: United Kingdom
- My Cars: MK2 '17 C4GP 1.6 BlueHDi 120
'13 3008 1.6 HDi GripControl - x 996
Re: Timing belt replacement, crank pin hole diameter
You should be able to buy a set of pins quite cheaply, e.g. here, in the UK
This shows the dimensions of the crank pin:
This shows the dimensions of the crank pin:
Richard W
- GiveMeABreak
- Forum Admin Team
- Posts: 37331
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5721
Re: Timing belt replacement, crank pin hole diameter
You might want to do the tensioner rollers too whilst at it.
Please Don't PM Me For Technical Help
Marc
Marc
-
- Posts: 48
- Joined: 21 Jan 2020, 12:29
- Location: Switzerland
- My Cars: 307 RESTYLING ESTATE - LEISURE 2.0 i 16v 143 (EW10A) Manual gearbox 5
- x 4
Re: Timing belt replacement, crank pin hole diameter
Thank you all for your precious help !!
Yes Marc i'm buying the whole SKF kit (belt+pump+rollers)
Jackie i will consider your idea about Poland holiday
Yes Marc i'm buying the whole SKF kit (belt+pump+rollers)
Jackie i will consider your idea about Poland holiday
-
- Posts: 48
- Joined: 21 Jan 2020, 12:29
- Location: Switzerland
- My Cars: 307 RESTYLING ESTATE - LEISURE 2.0 i 16v 143 (EW10A) Manual gearbox 5
- x 4
Re: Timing belt replacement, crank pin hole diameter
Does the timing belt retaining clip is essential ? or i can use a plastic tie strap to keep it in position ?