Hi
Just reset the bios of the car because central locking wasn't working. Sorted that but prior to this problem the drivers window stopped closing in one. Instead I have to press the window button multiple times as it raises two inches ir so and stops. I tried using the bios reset to reset the window. Raise it to top before trying to lower it and keep finger pulliblng button at end for 10 secs but to no avail. The thing goes up but not great when driving to have to put it up in about ten stages. Any ideas?
C5 hdi 2006 Window Incremental closing
Moderator: RichardW
-
- Posts: 906
- Joined: 07 May 2009, 19:51
- Location: Angus
- My Cars:
- x 1
C5 hdi 2006 Window Incremental closing
C'est pas possible!
- myglaren
- Forum Admin Team
- Posts: 25454
- Joined: 02 Mar 2008, 13:30
- Location: Washington
- My Cars: Mazda 6
Ooops.
Previously:
2009 Honda Civic :(
C5, C5, Xantia, BX, GS, Visa.
R4, R11TXE, R14, R30TX - x 4917
Re: C5 hdi 2006 Window Incremental closing
May be coincidental. The guides get a bit 'tight' and a squirt of silicone lubricant in the guides can help.
Worth a few more attempts with the anti-pinch reset procedure though.
Worth a few more attempts with the anti-pinch reset procedure though.
- GiveMeABreak
- Forum Admin Team
- Posts: 37300
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5711
Re: C5 hdi 2006 Window Incremental closing
Make sure you have followed the BSI procedure correctly: failure to do so will not solve anything.
BSI Reset / Battery Disconnect / Reconnect Procedure
If you have done this, then make sure you reinitialise the anti pinch systems on the windows:
Lower window, then raise window. If it stops, release the button then raise again in steps until it fully shuts. When it has reached the top, release the button, then lift the button to raise the window again until you hear a soft click, then release. It should only take a second or 2. Don't hold it up any longer than is necessary or it will deactivate for thermal protection.
BSI Reset / Battery Disconnect / Reconnect Procedure
If you have done this, then make sure you reinitialise the anti pinch systems on the windows:
Lower window, then raise window. If it stops, release the button then raise again in steps until it fully shuts. When it has reached the top, release the button, then lift the button to raise the window again until you hear a soft click, then release. It should only take a second or 2. Don't hold it up any longer than is necessary or it will deactivate for thermal protection.
Please Don't PM Me For Technical Help
Marc
Marc