Part number required (again) please
-
Benscab123
- Posts: 158
- Joined: 09 Jul 2019, 20:33
- x 3
Part number required (again) please
Could someone please tell me the part number for the metal bracket that holds the headlamp bulb in place please (dipped beam). Thanks
-
RichardW
- Forum Treasurer
- Posts: 12508
- Joined: 07 Aug 2002, 17:12
- x 1456
Re: Part number required (again) please
Not sure exactly which bit you mean, but I don't think it will be available separately, as only the complete headlamp is listed:
A new one is a snip at £310.....!
A new one is a snip at £310.....!
Richard W
-
Benscab123
- Posts: 158
- Joined: 09 Jul 2019, 20:33
- x 3
Re: Part number required (again) please
It’s the metal clip that holds the bulb in place Richard. Don’t see it on here.
-
RichardW
- Forum Treasurer
- Posts: 12508
- Joined: 07 Aug 2002, 17:12
- x 1456
Re: Part number required (again) please
Ah, these are different - the bulb is an H7 and is restrained by a 1/4 turn. There must be some sort of clip on the back of the lamp, but I can't remember if it will come off or not. I always had to get a mirror on the OS to get the bulb back in as I could never remember which way to turn it!!
Richard W
-
Benscab123
- Posts: 158
- Joined: 09 Jul 2019, 20:33
- x 3
Re: Part number required (again) please
Something similar to this but with a rectangular hole .
-
Benscab123
- Posts: 158
- Joined: 09 Jul 2019, 20:33
- x 3
-
GiveMeABreak
- (Donor 2016)
- Posts: 41989
- Joined: 15 Sep 2015, 19:38
- x 6961
Re: Part number required (again) please
That's the wrong light anyway Richard
Should be this one:
Not that it shows the bulb clamps either though...
Edit My bad - I was dealing with another vehicle - wrong post!
Should be this one:
Not that it shows the bulb clamps either though...
Edit My bad - I was dealing with another vehicle - wrong post!
Please note, I'm no longer active on the Forum, so won't respond to messages.
Marc
Marc
-
white exec
- Posts: 7445
- Joined: 21 Dec 2015, 12:46
- x 1751
Re: Part number required (again) please
As those clips are not actually attached (unlike the wire versions), maybe they are available as a spare part.
If not a Citroen part, maybe a Valeo one?
If not a Citroen part, maybe a Valeo one?
Chris
-
GiveMeABreak
- (Donor 2016)
- Posts: 41989
- Joined: 15 Sep 2015, 19:38
- x 6961
Re: Part number required (again) please
I've had a look at Valeo's automotive lighting catalogue and there;s nothing listed apart from the bulbs themselves that I can see.
Please note, I'm no longer active on the Forum, so won't respond to messages.
Marc
Marc
-
RichardW
- Forum Treasurer
- Posts: 12508
- Joined: 07 Aug 2002, 17:12
- x 1456
Re: Part number required (again) please
One I posted is for a Mk1 C4 Pic (as per the OP's cars list), yours is a C3 (?) Marc, but since the OP didn't specify, we could both be wrong! However, given the pic later posted of the clip, I rather think I am right this time....GiveMeABreak wrote: 16 Dec 2019, 11:33 That's the wrong light anyway Richard![]()
Should be this one:
Not that it shows the bulb clamps either though...
Richard W
-
RichardW
- Forum Treasurer
- Posts: 12508
- Joined: 07 Aug 2002, 17:12
- x 1456
-
GiveMeABreak
- (Donor 2016)
- Posts: 41989
- Joined: 15 Sep 2015, 19:38
- x 6961
Re: Part number required (again) please
Yes, wrong post Richard! I've edited my post as I was dealing with another issue on a C3 at the same time 
Please note, I'm no longer active on the Forum, so won't respond to messages.
Marc
Marc
-
Benscab123
- Posts: 158
- Joined: 09 Jul 2019, 20:33
- x 3
Re: Part number required (again) please
Thanks guys, got them on order.