Hi all. Ive been having trouble starting my van in the mornings. The van has an xud9te engine. Unless I pump the black grenade thingy a load of times it really doesn’t want to start. I’ve been told it could be air getting into the fuel line?
Any help appreciated!!
Air leak in fuel line?!?
Moderator: RichardW
- white exec
- Moderating Team
- Posts: 7445
- Joined: 21 Dec 2015, 12:46
- Location: Sayalonga, Malaga, Spain
- My Cars: 1996 XM 2.5TD Exclusive hatch RHD
1992 BX19D Millesime hatch LHD
previously 1989 BX19RD, 1998 ZX 1.9D auto, 2001 Xantia 1.8i auto
and lots of Rovers before that: 1935 Ten, 1947 Sixteen, 1960 P5 3-litre, 1966 P6 2000, 1972 P6 2000TC, and 1975 P6B 3500S - x 1752
Re: Air leak in fuel line?!?
Connect in (with air-tight connections) a short length of non-collapsible transparent tubing just before the injector pump. This will allow you to monitor whether there is any air getting sucked into the fuel.
Suspect the priming bulb itself, and the fuel filter, and fuel pipe connections.
Also check that all the glowplugs are working. Check out the GPs and the connections at the GP relay. Unbolt each connection, and clean up. GP relay internal contacts also worth checking. Each individual should be pulling around 9amp.
Suspect the priming bulb itself, and the fuel filter, and fuel pipe connections.
Also check that all the glowplugs are working. Check out the GPs and the connections at the GP relay. Unbolt each connection, and clean up. GP relay internal contacts also worth checking. Each individual should be pulling around 9amp.
Chris
-
- Moderating Team
- Posts: 11574
- Joined: 02 Apr 2005, 16:11
- Location: Charmouth,Dorset
- My Cars: Currently:
C5 X7 VTR + Satnav Hdi estate Silver
C5 X7 VTR + Hdi Estate 2008 Red
In the past: 3, CX td Safaris and about 7, XM td estates. Lovely cars. - x 1204
Re: Air leak in fuel line?!?
Being and XUD I would as Chris does, suspect the glow plugs. If you have a multimeter with an ohms range, check the resistance between the terminal and earth with the lead disconnected, a good plug should read around 1 ohm or less if you can get a really good connection. Any that don't read at all are duff, but they can go high resistance so anything much over 1 ohm could mean that the heat output is down.
Peter
Peter