The exhaust heat shield above the backbox is rattling because one of the fixings is missing (pictured).
There is a captive thread sticking out the middle hole (the picture does not show this well at all) but it is very rusty and probably wont take a nut or will snap if I try.
Is there a way to replace this as I can't see a way to get to the top of it?
Thanks
C5 X7 Exhaust Silencer Heat Shield Fixings
Moderator: RichardW
- GiveMeABreak
- Forum Admin Team
- Posts: 37433
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5742
Re: C5 X7 Exhaust Silencer Heat Shield Fixings
Item 5 would seem to be the part in question - although there are no specific fixings detailed for this part that are immediately obvious....
The associated fixings can be seen though for the various other parts. It is fixed in 4 locations at the corners - so you would have to at least loosen some of the others to get the bit out I suspect.
The associated fixings can be seen though for the various other parts. It is fixed in 4 locations at the corners - so you would have to at least loosen some of the others to get the bit out I suspect.
Please Don't PM Me For Technical Help
Marc
Marc