Just been watching this - it is like magic
Apologies fro BMW content
Car manufacturing
Moderator: RichardW
- NewcastleFalcon
- Posts: 24563
- Joined: 25 Feb 2009, 10:40
- Location:
- My Cars:
- x 6866
Re: Car manufacturing
Yes, your thread title Steve allows this to be bang on topic, and a revival from the archives.
Now only the most determined will be able to watch the whole lot of this, and overcome the narration which is totally in French, so the link just jumps to a point in the film where there is a bit of molten metal, and casting of cylinder blocks, all in the same factory, not arriving sanitised and "just in time" from half the globe away!
Yes this is how the french used to do it at "L'USINE PEUGEOT DE SOCHAUX EN 1954"
and the end product this the Peugeot 403
regards Neil
Now only the most determined will be able to watch the whole lot of this, and overcome the narration which is totally in French, so the link just jumps to a point in the film where there is a bit of molten metal, and casting of cylinder blocks, all in the same factory, not arriving sanitised and "just in time" from half the globe away!
Yes this is how the french used to do it at "L'USINE PEUGEOT DE SOCHAUX EN 1954"
NewcastleFalcon wrote: ↑02 May 2017, 11:33 This film makes you appreciate just what it takes to construct a car. I can't imaging Nissan at Sunderland or Tesla in the US having an on-site foundry, with molten metal all over the place. I liked the forging of the con rods, and the casting of the engine blocks, with the team of workers with the minimal protective clothing, with a nice touch being the "Skimmer" pushing back the crud as his workmate poured the metal into the mould.
This is the bit of the film I mean, if you haven't watched the entire film. Berets seemed compulsory when dealing with hot metal!
https://youtu.be/atP0kFM-Xko?t=613
and the end product this the Peugeot 403
regards Neil
Last edited by NewcastleFalcon on 29 Apr 2019, 00:14, edited 2 times in total.
Only One AA Box left
687 Trinity, Jersey
687 Trinity, Jersey
- white exec
- Moderating Team
- Posts: 7445
- Joined: 21 Dec 2015, 12:46
- Location: Sayalonga, Malaga, Spain
- My Cars: 1996 XM 2.5TD Exclusive hatch RHD
1992 BX19D Millesime hatch LHD
previously 1989 BX19RD, 1998 ZX 1.9D auto, 2001 Xantia 1.8i auto
and lots of Rovers before that: 1935 Ten, 1947 Sixteen, 1960 P5 3-litre, 1966 P6 2000, 1972 P6 2000TC, and 1975 P6B 3500S - x 1752
Re: Car manufacturing
re: the BMW
Wow!
Surprised to see the bits being done manually...
ABB doing well on the robotics.
And Michelin tyres!
Fascinating.
Wow!
Surprised to see the bits being done manually...
ABB doing well on the robotics.
And Michelin tyres!
Fascinating.
Chris
-
- (Donor 2020)
- Posts: 7171
- Joined: 08 Jun 2011, 18:04
- Location: GL15***
- My Cars: 2006 C5 2.0 Litre HDI VTR Automatic Estate.(now sold on)
Currently Renault Zoe 2014 ZE - x 2500
Re: Car manufacturing
Those 'workers' can't be found sleeping under the bench on the night shift or sitting in the lavvy for half an hour reading the Daily Mirror or gathering out in the car park with hands in the air shouting "One out all out!"
Man is, by nature, a lazy beast, he does not need twice encouraging to do nothing.
- white exec
- Moderating Team
- Posts: 7445
- Joined: 21 Dec 2015, 12:46
- Location: Sayalonga, Malaga, Spain
- My Cars: 1996 XM 2.5TD Exclusive hatch RHD
1992 BX19D Millesime hatch LHD
previously 1989 BX19RD, 1998 ZX 1.9D auto, 2001 Xantia 1.8i auto
and lots of Rovers before that: 1935 Ten, 1947 Sixteen, 1960 P5 3-litre, 1966 P6 2000, 1972 P6 2000TC, and 1975 P6B 3500S - x 1752
Re: Car manufacturing
Also missing from the are the guys with the hammers 'aligning' doors and body panels, a common sight on Leyland assembly lines. BMW seem to do it with a polishing cloth!
Did like the robotic tack-gluing of the body shell parts, and the robot arm that opened a door before spraying inside. We had a tom cat that used to do that . . .
Did like the robotic tack-gluing of the body shell parts, and the robot arm that opened a door before spraying inside. We had a tom cat that used to do that . . .
Chris
- GiveMeABreak
- Forum Admin Team
- Posts: 37005
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5646
Re: Car manufacturing
All tin foil and plastic these days and I notice how thin the 'foil' is from the wobbling at the beginning of the video - it's like tissue paper. So glad to see that BMW is no different in that video - I see they have a few token pensioners kept on for feeling the cars at 7:36 - nothing too taxing!
But as this is a French Car Forum, I'm putting up some video links to the C5 X7 production. The Rennes factory where they were all made of course, which might be of more interest to X7 owners. Bear in mind this would be 11 years ago now....
At least here you can see Madame Meunier with drill in hand giving it her all! But she does get a de-merit mark, as she obviously did not check my alloys properly for 'bubbling'.
.
I haven't yet managed to locate the individual responsible for the diabolical steering racks they fitted yet, but still searching....
Part 1
Part 2
Part 3
But as this is a French Car Forum, I'm putting up some video links to the C5 X7 production. The Rennes factory where they were all made of course, which might be of more interest to X7 owners. Bear in mind this would be 11 years ago now....
At least here you can see Madame Meunier with drill in hand giving it her all! But she does get a de-merit mark, as she obviously did not check my alloys properly for 'bubbling'.
.
I haven't yet managed to locate the individual responsible for the diabolical steering racks they fitted yet, but still searching....
Part 1
Part 2
Part 3
Please Don't PM Me For Technical Help
Marc
Marc