207 diabox enquiry

[fotobright]

Hi,

Just installed diabox on laptop, first time using diagbox and lexia. I've not hooked it up to the car yet but looking within DiagBox / PP2000 there are three different models for the 207 -

207 VAN
207 CAN
207i

Does anyone know what models / year of 207 these refer to ??

I have a 207 sport SW, 1.6hdi 90hp (Oct 2009

[GiveMeABreak]

Diagbox will launch the correct software for the vehicle and being a 2009, that will be Diagbox.

No need to worry about the electronic architecture, as Diagbox will determine this once it has connected and correctly identified the VIN.

If you have not used the software before, I strongly suggest you read the guidance here first:

Diagbox User Advice

If you want to know what the electronic architecture your 207 uses, you will need to pop up your VIN here.

[MikeT]

All I know is I initially chose the wrong 207 (petrol) model once and was met with a Global Test list of ECU's not found. After backing out and the correct model selected, I could interrogate all the systems just fine.

[fotobright]

Diagbox will launch the correct software for the vehicle and being a 2009, that will be Diagbox.

No need to worry about the electronic architecture, as Diagbox will determine this once it has connected and correctly identified the VIN.

If you have not used the software before, I strongly suggest you read the guidance here first:

Diagbox User Advice

If you want to know what the electronic architecture your 207 uses, you will need to pop up your VIN here.

Thanks, will defo read the diagbox advice first.

[fotobright]

All I know is I initially chose the wrong 207 (petrol) model once and was met with a Global Test list of ECU's not found. After backing out and the correct model selected, I could interrogate all the systems just fine.

Good to know, thanks