DIY cranking or booster battery pack

This is the place for posts that don't fit into any other category.

Moderator: RichardW

Post Reply
MikeT
Posts: 4809
Joined: 11 Jun 2007, 16:17
Location: Christchurch, Dorset. UK
My Cars: 2005 C5restyle 1.6HDI 16v 110hp VTR Estate
2008 C5 X7 1.6HDI VTR+ Saloon
x 231

DIY cranking or booster battery pack

Post by MikeT »

Following the C3's recent battery discharge and last winter's concerns over the C5's battery condition I think it's prudent I obtain a portable booster pack before the cold season arrives.

Although the LiPo cells I'm familiar with are a good choice in that respect, I've since learnt that LifePo4 is the chemistry of choice. Not just as jumpstart/booster packs but as direct upgrades for the SLA cranky too. They weigh less, tolerate discharge better, recharge quicker, last longer, etc, etc.

So the plan is to build a pack that meets or exceeds the C5's requirement of 720CCA.
Trouble is, trying to find out which cell offers best capacity, discharge rate, size, shape, weight and cost? I've tried scouring the internet but it's like herding cats. ](*,)
After that, it should be a doddle :lol:
User avatar
EDC5
(Donor 2020)
Posts: 1216
Joined: 01 Jul 2017, 21:48
Location: N. Wales
My Cars: Citroen C5 RHR AM6
x 120

Re: DIY cranking or booster battery pack

Post by EDC5 »

That's a very interesting project, I'd recommend watching videos by a guy on Youtube who wanted to replace a 12v battery in his electric bike with LiFePO4 batteries.





While It seems a good idea in principle, I'm not sure how tolerant of a noisy DC supply from the alternator these batteries would be.
Last edited by myglaren on 16 Oct 2018, 18:15, edited 1 time in total.
Reason: YouTube links
User avatar
white exec
Moderating Team
Posts: 7445
Joined: 21 Dec 2015, 12:46
Location: Sayalonga, Malaga, Spain
My Cars: 1996 XM 2.5TD Exclusive hatch RHD
1992 BX19D Millesime hatch LHD
previously 1989 BX19RD, 1998 ZX 1.9D auto, 2001 Xantia 1.8i auto
and lots of Rovers before that: 1935 Ten, 1947 Sixteen, 1960 P5 3-litre, 1966 P6 2000, 1972 P6 2000TC, and 1975 P6B 3500S
x 1752

Re: DIY cranking or booster battery pack

Post by white exec »

Have just been reading Wikipedia's entry on these LiFePO4 batteries.
Looks like a significant collection of breakthroughs...
https://en.wikipedia.org/wiki/Lithium_i ... te_battery
...not least the potential for re-charge in less than a minute - faster than you could re-fill and ICE.

Applications and advantages, too, for small-sized batteries (AA-size etc), in circuit simplicity, connection and environmental concerns.
Chris
MikeT
Posts: 4809
Joined: 11 Jun 2007, 16:17
Location: Christchurch, Dorset. UK
My Cars: 2005 C5restyle 1.6HDI 16v 110hp VTR Estate
2008 C5 X7 1.6HDI VTR+ Saloon
x 231

Re: DIY cranking or booster battery pack

Post by MikeT »

I like Julian's vids, Ellis, very educational.
The industrial LifePO4 SLA replacements should have built-in BMS/protection-circuitry. Something I'lll look into once (if) I succeed in creating a useable portable booster pack I'm happy with. Prices are beginning to look quite scary though.

Indeed, Chris. Looks like my solar/led systems may be getting LifePO4 upgrades too (even though it's almost two decades-old tech).... just when I thought LiPo was the bees-knees :D
And I believe China are about to wipe the floor with something even better, achieving EV battery density of 200Wh/Kg?
User avatar
GiveMeABreak
Forum Admin Team
Posts: 37005
Joined: 15 Sep 2015, 19:38
Location: West Wales
My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow
x 5646

Re: DIY cranking or booster battery pack

Post by GiveMeABreak »

MikeT wrote: 16 Oct 2018, 17:43And I believe China are about to wipe the floor with something even better, achieving EV battery density of 200Wh/Kg?
Yes, coal-fired no doubt.
Please Don't PM Me For Technical Help

Marc
MikeT
Posts: 4809
Joined: 11 Jun 2007, 16:17
Location: Christchurch, Dorset. UK
My Cars: 2005 C5restyle 1.6HDI 16v 110hp VTR Estate
2008 C5 X7 1.6HDI VTR+ Saloon
x 231

Re: DIY cranking or booster battery pack

Post by MikeT »

"It's too late for pessimism"

User avatar
myglaren
Forum Admin Team
Posts: 25366
Joined: 02 Mar 2008, 13:30
Location: Washington
My Cars: Mazda 6
Ooops.
Previously:
2009 Honda Civic :(
C5, C5, Xantia, BX, GS, Visa.
R4, R11TXE, R14, R30TX
x 4888

Re: DIY cranking or booster battery pack

Post by myglaren »

That is a truly excellent film - I have two copies of it here.
User avatar
EDC5
(Donor 2020)
Posts: 1216
Joined: 01 Jul 2017, 21:48
Location: N. Wales
My Cars: Citroen C5 RHR AM6
x 120

Re: DIY cranking or booster battery pack

Post by EDC5 »

MikeT wrote: 16 Oct 2018, 17:43 I like Julian's vids, Ellis, very educational.
The industrial LifePO4 SLA replacements should have built-in BMS/protection-circuitry. Something I'lll look into once (if) I succeed in creating a useable portable booster pack I'm happy with. Prices are beginning to look quite scary though.

Indeed, Chris. Looks like my solar/led systems may be getting LifePO4 upgrades too (even though it's almost two decades-old tech).... just when I thought LiPo was the bees-knees :D
And I believe China are about to wipe the floor with something even better, achieving EV battery density of 200Wh/Kg?


I've been following Julian for some years, I owe my hobbying interest in electronics to him almost entirely. Plenty of videos explaining electronics concepts in basic terms along with practical circuits that are easy to copy at home.

I especially liked his series on making a Maximum Power Point Tracking solar panel charge controller. I made my own version and went a bit further by learning how to etch PCB's too.

On topic though, and I'm surprised that the Lead acid is still so prevalent. Even some EV's have a traditional 12v Lead acid which just seems bizarre.
User avatar
van ordinaire
(Donor 2017)
Posts: 2537
Joined: 23 Jun 2015, 14:45
Location: Live & work in London but weekend in Devon (or do I now live in Torbay & work in London?)
My Cars: Citroens:-
'81 2CV Club (quietly sleeping in a parallel universe)
'05 (yes, really) C15
'97 Xantia Exclusive estate
others:-
'96 Jeep Cherokee Limited - the "donor"
'99 Jeep Cherokee Orvis - the green one
'97 Jeep Cherokee Limited - the red one
'99 Cadillac Seville STS
'96 Cadillac Eldorado ETC
& numerous what might be described as abandoned projects!
x 405

Re: DIY cranking or booster battery pack

Post by van ordinaire »

Traditional batteries are (relatively) inexpensive, (increasingly) dependable & readily available all over the world, in a bewildering choice of dimensions, capacity & terminal arrangement - & now there is some suggestion that the much vaunted red and yellow top batteries may not be all they were cracked up to be. However, a lead acid battery in an EV goes beyond irony; that said, I did read the explanation (on this very forum, I believe) for that & it all made perfect sense at the time.
Citroens:-
'81 2CV Club :cry:
'05 C15 :!:
'97 Xantia Exclusive estate [-o<
others:-
Jeep XJ Cherokees x 3 :?
'96 Cadillac Eldorado
'99 Cadillac STS :|
& the numerous "abandoned projects" #-o
User avatar
Paul-R
Donor 2023
Posts: 6916
Joined: 07 May 2009, 16:24
Location: Wirral, NW England; Vaucluse 84, France
Lexia Available: Yes
My Cars: 2015 1.6 Blue HDi 120 Peugeot 308 Active SW
2013 2.0 HDi 163 C5 Exclusive Tourer
2003 2.0 HDi 110 C5 Exclusive Estate (Gone)
2001 2.0 HDi 90 Xsara Estate (Gone)
x 1369

Re: DIY cranking or booster battery pack

Post by Paul-R »

A lead acid battery is also far more tolerant of charging and discharging conditions compared to any of the Li-ion family. It needs only the most basic charging circuitry.
As I get older I think a lot about the hereafter - I go into a room and then wonder what I'm here after.

Inside every old person is a young person wondering what the hell happened.

"Trying is the first step towards failure" ~ Homer J Simpson​
MikeT
Posts: 4809
Joined: 11 Jun 2007, 16:17
Location: Christchurch, Dorset. UK
My Cars: 2005 C5restyle 1.6HDI 16v 110hp VTR Estate
2008 C5 X7 1.6HDI VTR+ Saloon
x 231

Re: DIY cranking or booster battery pack

Post by MikeT »

Lead acid has had its day, horribly toxic, weighty, bulky, slow to charge, self-discharging, short-lived, money for old rope.
User avatar
white exec
Moderating Team
Posts: 7445
Joined: 21 Dec 2015, 12:46
Location: Sayalonga, Malaga, Spain
My Cars: 1996 XM 2.5TD Exclusive hatch RHD
1992 BX19D Millesime hatch LHD
previously 1989 BX19RD, 1998 ZX 1.9D auto, 2001 Xantia 1.8i auto
and lots of Rovers before that: 1935 Ten, 1947 Sixteen, 1960 P5 3-litre, 1966 P6 2000, 1972 P6 2000TC, and 1975 P6B 3500S
x 1752

Re: DIY cranking or booster battery pack

Post by white exec »

I'd be pleased to see the backside of 12v lead-acid gel-type batteries for things like UPSs. Seem to have a life of not much more than three years when used in series for a 24v units, and only slightly better for single-battery 12v ones.

Have a couple of UPSs which, when the battery finally died, I just parked a much larger Ah one beside it, decently wired in. Most of these UPS units seem well able to look after the charge requirements of larger (same type) batteries, just taking longer to recharge them.

At least now the call-off current for backing up PCs has plummeted, particularly now monitors are LCD.
Chris
MikeT
Posts: 4809
Joined: 11 Jun 2007, 16:17
Location: Christchurch, Dorset. UK
My Cars: 2005 C5restyle 1.6HDI 16v 110hp VTR Estate
2008 C5 X7 1.6HDI VTR+ Saloon
x 231

Re: DIY cranking or booster battery pack

Post by MikeT »

I haven't used a desktop for eons - since getting one of those free energy monitors off SSE - as I was horrified to see the consumption difference of it compared to my 17" laptop. It also made my UPS redundant as we all know the laptop has one built-in.

Anyway, decided to take the C5 out today as it's been sat for a week and as I've now got one of those ciggy lighter voltmeters (because the Citroen-provided battery gauge on the dash is useless in this respect).
Cranking was slow but it started ok and immediately registered 14.2v. I took the long way round to the GP surgery and returned home via the same long route, covering over 20miles in all, running as few electricals as possible (though I did listen to the 3pm news and traffic announcement). After parking up, it showed 12.2v once the surface charge was absorbed.

I suspect the battery's part-sulfated and simply won't take a full charge anymore so I'm going to save my pennies and buy some of those headway cells before the cold weather gets here.

Would anyone else be interested in purchasing these cells, as I'm currently composing an email to enquire about capacity options and if any discounts can be had?
User avatar
EDC5
(Donor 2020)
Posts: 1216
Joined: 01 Jul 2017, 21:48
Location: N. Wales
My Cars: Citroen C5 RHR AM6
x 120

Re: DIY cranking or booster battery pack

Post by EDC5 »

white exec wrote: 17 Oct 2018, 12:48
Have a couple of UPSs which, when the battery finally died, I just parked a much larger Ah one beside it, decently wired in. Most of these UPS units seem well able to look after the charge requirements of larger (same type) batteries, just taking longer to recharge them.

At least now the call-off current for backing up PCs has plummeted, particularly now monitors are LCD.

This is true, I linked 4 88AH deep cycle 'marine' lead acids to a beefy HP UPS. It didn't seem to complain and recalibrated it's runtime accordingly which amazed me.


MikeT wrote: 17 Oct 2018, 16:40
Would anyone else be interested in purchasing these cells, as I'm currently composing an email to enquire about capacity options and if any discounts can be had?
I'm not sure If I would be interesting in making my own car battery (as I've recently bought a new one), but I'd like a few LiFePO4 cells to play around with if you get a good price.
MikeT
Posts: 4809
Joined: 11 Jun 2007, 16:17
Location: Christchurch, Dorset. UK
My Cars: 2005 C5restyle 1.6HDI 16v 110hp VTR Estate
2008 C5 X7 1.6HDI VTR+ Saloon
x 231

Re: DIY cranking or booster battery pack

Post by MikeT »

Got a reply to my email. Unfortunately, they only offer discounts on large orders (50+) so that's off the table. Also, their 15Ah cells are out of stock until December.
Of the three they do stock, it's the smaller capacity 8Ah cells that provide the highest burst output.

As I need a 4S configuration, ensuring adequate capacity could prove expensive - The battery for my C3 is specified at 600cca and the C5 at 720cca.
But I note in your captured data Ellis, the cranking current (albeit in relatively warm temperatures) only peaked at 270A.

Presently, I can't find any other vendor of these cells that I'd trust, even though they're cheaper elsewhere.
Post Reply