Hello, I have a C5 2.0 hdi Exclusive 2009.
I have managed to obtain a genuine Citroen bluetooth phone module and I assume that, like the Peugeot, it fits behind the glove box. If this is the case, could anybody tell me how to remove the glove box?
If the bluetooth module does not go behind the glove box, do you know where it is supposed to live and how to get to its home?
Thank you in the hope of....
Citroen c5 2009, Fitting genuine bluetooth module
Moderator: GiveMeABreak
- GiveMeABreak
- Forum Admin Team
- Posts: 37005
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5646
Re: Citroen c5 2009, Fitting genuine bluetooth module
Hi and welcome.
First of all, can you post or PM your VIN - I need to check on full system specs for your car. Fitting this module can cause problems with your system if not compatible with the other on board equipment / options. There were several systems available and each can have many configurations. We really need to check this before you install this part first of all.
First of all, can you post or PM your VIN - I need to check on full system specs for your car. Fitting this module can cause problems with your system if not compatible with the other on board equipment / options. There were several systems available and each can have many configurations. We really need to check this before you install this part first of all.
Please Don't PM Me For Technical Help
Marc
Marc
Re: Citroen c5 2009, Fitting genuine bluetooth module
Hi, thank you for your reply.
The VIN is: VF7**************[VIN obfuscated, can be read by forum staff]********. This task is going to be a fairly gentle process as I am working away from this week and I will not have access to communication systems from this evening until next Sunday.
I appreciate any assistance you may be able to provide
Thanks
John
The VIN is: VF7**************[VIN obfuscated, can be read by forum staff]********. This task is going to be a fairly gentle process as I am working away from this week and I will not have access to communication systems from this evening until next Sunday.
I appreciate any assistance you may be able to provide
Thanks
John
Last edited by GiveMeABreak on 09 Sep 2018, 09:47, edited 1 time in total.
Reason: VIN Masked
Reason: VIN Masked
- GiveMeABreak
- Forum Admin Team
- Posts: 37005
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5646
Re: Citroen c5 2009, Fitting genuine bluetooth module
Ok John, so I've checked your specs and you are likely to have a bit of work to do trying to fit this to be honest.
First of all - that module is not compatible for the X7. The connectors are in the wrong location for a start and that part number is not for this model.
Next, you have the RD4 system - and looking at your specification, you only have the items that I have marked with yellow dots in the diagram below. You would require to have the items marked with Red dots too:
Click pictures to Zoom
However, if you were to locate the correct part - the difficulty a friend had was trying to locate the pre-existing microphone wiring end output.
So you'd need the USB cable and the correct module and support unit, then you'd need to configure it to your car's system using Diagbox.
Alternatively, you could source and RD45 unit - which has the blueooth unit built in to the Head Unit, so won't need any extra units to be sourced. The USB cable and socket can be purchased later if you want to have MP3 files played off a USB stick etc. You may need to replace the multifunction screen display for the version to support the RD45 and will need to configure the unit to the car to enable the changes though.
First of all - that module is not compatible for the X7. The connectors are in the wrong location for a start and that part number is not for this model.
Next, you have the RD4 system - and looking at your specification, you only have the items that I have marked with yellow dots in the diagram below. You would require to have the items marked with Red dots too:
Click pictures to Zoom
Yellow Items you have, Red you need |
So you'd need the USB cable and the correct module and support unit, then you'd need to configure it to your car's system using Diagbox.
These Pictures show the location of the unit on a right hand drive. |
Please Don't PM Me For Technical Help
Marc
Marc
Re: Citroen c5 2009, Fitting genuine bluetooth module
Thank you Marc. I am up for a challenge so I will have a look around. I'll let you know how I get on.
While I am here, I have one more question about an unrelated annoyance. The powered tailgate works in all resppects except that it does not latch on closing. Is there any way of adjusting the latch or latching hoop to bring them closer together?
While I am here, I have one more question about an unrelated annoyance. The powered tailgate works in all resppects except that it does not latch on closing. Is there any way of adjusting the latch or latching hoop to bring them closer together?
- EDC5
- (Donor 2020)
- Posts: 1216
- Joined: 01 Jul 2017, 21:48
- Location: N. Wales
- My Cars: Citroen C5 RHR AM6
- x 120
Re: Citroen c5 2009, Fitting genuine bluetooth module
You may want to read this thread: viewtopic.php?f=52&t=58078&hilit=rd45#p540330
I originally had the RD4 but upgraded it to the RD45 in order to get hands free connectivity. I had to run my own wire to the microphone from the back of the radio as I couldn't trace the terminus of the pre-installed wiring.
I originally had the RD4 but upgraded it to the RD45 in order to get hands free connectivity. I had to run my own wire to the microphone from the back of the radio as I couldn't trace the terminus of the pre-installed wiring.
- citroC5
- (Donor 2022)
- Posts: 92
- Joined: 27 Mar 2019, 22:20
- Location: Porto, Portugal
- My Cars: 2010 Citroen C5 Tourer 2.0hdi
2008 Citroen C5 Tourer 1.6Hdi (gone)
1994 Citroen AX 1.1i Image (belongs to my better ½)
1991 Citroen BX 16 TZS (gone)
2000 Volvo S60 T5 (gone) - x 19
- Contact:
Re: Citroen c5 2009, Fitting genuine bluetooth module
That was great info, everyone. Thanks very much!