I'm having problems with a RNEG unit in my C5 2012. The original headunit suffered from restarting issue. So I decided to swap it for another RNEG (MyWay). Now it doesn't restart, it works fine, bur on dash display it says "Zone not mapped", whereas on the central 7" display map info is correctly displayed.
Any solutions to this one?
Mirascripts won't work here as this isn't a Magenti Marelli unit...
RNEG (MyWay) Swap Issues
Moderator: GiveMeABreak
-
- Posts: 1503
- Joined: 26 Feb 2003, 10:52
- Location: Yorkshire
- My Cars: Current:
Volvo V60 D4 180
Previous:
BX16RS (two of),
BX19TZI,
Xantia 2.0i saloon,
Xantia 2.0 Exclusive CT turbo Break,
Peugeot 807 2.0 HDi 110,
Renault Grand Scenic, 2.0 diesel (150bhp)
C5 X7 2.0 HDi 160 which put me off French cars possibly forever - x 16
Re: RNEG (MyWay) Swap Issues
Thanks for the input!
I've read the begining of the post. But problem there was with eMyWay (RNEG2) headunit which can read USB and hence Mirascripts are aplicable.
But here's the situation with MyWay (RNEG) and that's completly different software base (Quinx operating system) and unfortunatelly can't be modified with Mirascripts...
Any other ideas?
I've read the begining of the post. But problem there was with eMyWay (RNEG2) headunit which can read USB and hence Mirascripts are aplicable.
But here's the situation with MyWay (RNEG) and that's completly different software base (Quinx operating system) and unfortunatelly can't be modified with Mirascripts...
Any other ideas?
- GiveMeABreak
- Forum Admin Team
- Posts: 37323
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5721
Re: RNEG (MyWay) Swap Issues
I’m splitting this into a new thread as this is causing confusion.
Please Don't PM Me For Technical Help
Marc
Marc
- GiveMeABreak
- Forum Admin Team
- Posts: 37323
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5721
Re: RNEG (MyWay) Swap Issues
So on the replacement unit, you will have retained the configuration parameters in the ECU from the previous vehicle. if you have access to Diagbox, I would suggest you check through the ECU / BSI configuration, to make sure the correct country or region options are set. If any of these are wrong, including the dashboard instrument display screen, then you may have problems.MacSlavko wrote: ↑13 May 2018, 20:49 Thanks for the input!
I've read the begining of the post. But problem there was with eMyWay (RNEG2) headunit which can read USB and hence Mirascripts are aplicable.
But here's the situation with MyWay (RNEG) and that's completly different software base (Quinx operating system) and unfortunatelly can't be modified with Mirascripts...
Any other ideas?
Please Don't PM Me For Technical Help
Marc
Marc
Re: RNEG (MyWay) Swap Issues
Thanks for the input!
Don't have the access to DiagBox. In the C-Service they aparently just VIN-coded it to the car (no more Beeping), but maybe ther's something else to do as the navi-info aren't passed to the small MFD.
Strange though they didn't see or didn't know to set it up right in the authorised Citroen dealer?
Don't have the access to DiagBox. In the C-Service they aparently just VIN-coded it to the car (no more Beeping), but maybe ther's something else to do as the navi-info aren't passed to the small MFD.
Strange though they didn't see or didn't know to set it up right in the authorised Citroen dealer?
- GiveMeABreak
- Forum Admin Team
- Posts: 37323
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5721
Re: RNEG (MyWay) Swap Issues
It’s probably not something they do very often, that’s the reason. The units are already coded and configured to the vehicle with the correct options for that specific car and for the specific Country at the factory.
Dealer technicians never really need to do anything.
So as you have got one from another car, it may have some other settings from the other vehicle stored in the ECU. The correct VIN code will stop the beeping, but it won’t do anything else.
Dealer technicians never really need to do anything.
So as you have got one from another car, it may have some other settings from the other vehicle stored in the ECU. The correct VIN code will stop the beeping, but it won’t do anything else.
Please Don't PM Me For Technical Help
Marc
Marc