Hi All
I am replacing the gearbox in my 1997 1.9TD Xantia with one from a 1994/5 1.9TD car. I know there are two different types of clutch (push/pull) but what was the change over date or were they in production simultaneously. Is there any way to distinguish between them or am I going to be safe knowing that the 1994/5 Xantia will have the same type of clutch installed as my car.
Cheers
Gary
Push or Pull Clutch?
Moderator: RichardW
-
- Posts: 1079
- Joined: 14 Mar 2001, 01:49
-
- Posts: 2557
- Joined: 15 Oct 2003, 17:41
-
- Posts: 627
- Joined: 20 Oct 2004, 22:11
A way to tell is (although there are a lot of cables and hoses strapped to the gearbox) by looking at where the clutch cable connects on the gearbox. There is a moving arm and a static arm. If the moving arm is nearer to you (front of car) than the static arm then you have a push clutch and if the static arm is nearer to you then you have a pull clutch.