206 HEATER MATRIX

This is the Forum for all your Peugeot Technical Questions, Problems or Advice.

Moderator: RichardW

Post Reply
User avatar
Oldpug
Posts: 481
Joined: 07 Aug 2010, 11:15
Location: Berkshire
My Cars: Peugeot 406 GLX
Audi A3 TFSI S Line
Mercedes SL320
(In the past,just about every old Peugeot you can think of.)
x 64

206 HEATER MATRIX

Post by Oldpug »

I`ve replaced matrix`s on almost every Peugeot but surprisingly never done a 206.
This is a 1.1 TU 2003,what sort of job is it? anything to watch out for? Looks straight forward to me.
Thanks in advance you Peugeot buffs.
User avatar
spider
Posts: 3949
Joined: 05 Jan 2010, 14:28
Location: Derby.
My Cars: Soon, I hope...
x 77
Contact:

Re: 206 HEATER MATRIX

Post by spider »

Neither have I actually on one of these.

Actually (although slightly off topic) I only recently learned its possible to do a later 405 *without* taking the dash out, hmm.

BOL does not make any difficult noises about a 206. My thought was one with AC would need that evac'ing but it appears not as the heater box can stay still. Dash needs to come out or part out at least, then the matrix is clipped in and slides out. It does mention the clips will break (intended) and a couple of self tappers are needed to secure it. There are even pre-drilled holes for them already there.

As usual it suggests as part of dash removal to pull the column out (something personally I don't like doing on any car if I can avoid it) , I'd be tempted to see if the dash will "slide" up and twist enough maybe.

Unsure if this is any help. :)
Andy.

91 205D-Turbo, gone but still missed
02 106D, TUD5B, gone but not really missed apart from the MPG
Post Reply