CV boot fitting

This is the place for posts that don't fit into any other category.

Moderator: RichardW

KP
Posts: 3980
Joined: 10 Jul 2006, 12:11
Location: Warrington
My Cars:
x 27

Re: CV boot fitting

Post by KP »

It's all a bit double Dutch to me but I'm sure when i come to taking it apart it will make much more sense :)

Thanks guys :)
citronut
Posts: 10937
Joined: 29 Apr 2005, 00:46
Location: United Kingdom east sussex
My Cars:
x 92

Re: CV boot fitting

Post by citronut »

ps.

Will
if you send me the last 8 of your chassis/VIN No. i will get you the OE price and part No. for the snap ring
Regards, malcolm.

current ride a BX 1.7 TZD estate
1986 MK1 BX 1.9na D Auto(in Mothman Andy's stable )
layed up roppy 1.9TD XANT estate, now gone to meet her maker
purple and lilac metalic 2CV(VIOLET)registered to her in doors
1972 DS special been layed up aprox 31 years
User avatar
CitroJim
A very naughty boy
Posts: 49526
Joined: 30 Apr 2005, 23:33
Location: Paggers
My Cars: Bluebell the AX, Polly the C3 Picasso, Pix the Nissan Pixo, Propel the duathlon bike, TCR Pro the road bike and Fuji the TT bike...
x 6160
Contact:

Re: CV boot fitting

Post by CitroJim »

citronut wrote:actually the inner triax comes apart far easier than the outer as the trax is held on to the shaft with a normal circlip,
remove this then just tap the splined shaft end through and out of the spider,
That makes it a lot easier Malcolm but I could have sworn My Activa shaft spider did not have a circlip. Maybe it's just that one is a bit different to the rest. Hope so!
Jim

Runner, cyclist, time triallist, duathlete, Citroen AX fan and the CCC Citroenian 'From A to Z' Columnist...
citronut
Posts: 10937
Joined: 29 Apr 2005, 00:46
Location: United Kingdom east sussex
My Cars:
x 92

Re: CV boot fitting

Post by citronut »

well i have not taken a shaft apart from an Activa, but all the PSA shafts i have had apart have had a circlip holding the triax on
Regards, malcolm.

current ride a BX 1.7 TZD estate
1986 MK1 BX 1.9na D Auto(in Mothman Andy's stable )
layed up roppy 1.9TD XANT estate, now gone to meet her maker
purple and lilac metalic 2CV(VIOLET)registered to her in doors
1972 DS special been layed up aprox 31 years
citronut
Posts: 10937
Joined: 29 Apr 2005, 00:46
Location: United Kingdom east sussex
My Cars:
x 92

Re: CV boot fitting

Post by citronut »

here is the snap ring for a BE3 AND WITH ACTIVE ANTI-ROLL

this might not be as on your car Will,

DRIVE-SHAFT SNAP-RING
24,36 X 27,36 - 1,5

price and part No.

Part Number Description Quantity Price excl. VAT Price incl. VAT Total incl. VAT Selection
0000329406 DR SHF SNAP-RG 0.19 GBP 0.23 GBP 0.23 GBP
Regards, malcolm.

current ride a BX 1.7 TZD estate
1986 MK1 BX 1.9na D Auto(in Mothman Andy's stable )
layed up roppy 1.9TD XANT estate, now gone to meet her maker
purple and lilac metalic 2CV(VIOLET)registered to her in doors
1972 DS special been layed up aprox 31 years
Post Reply