I've just fitted a new rear bracket between anti roll bar and HCas a result of a broken link, suspension dropped (see previous thread).
I cannot get the rear suspension to rise and fall at all. What's happened
I need to fit new sphere's to rear (3)
Kenny
C5 x7 2.0 HDi 160 hp Estate exclusive, moved on.
Xantia 2.0 Hdi 90hp 1999 only 189,000 and rising!!!!!!! Moved on to a new home
C3 1.4 petrol (SWMBO)
Xantia TD 1.9 Mk 2 Estate LX 1998 model over 210,000 miles now and still rising!!!!!!!!!!!!! now deceased 17/12/2010.
Had time to think and my next question is, Has the height corrector seized.
I'm going to remove same and give it a good clean.
Kenny
C5 x7 2.0 HDi 160 hp Estate exclusive, moved on.
Xantia 2.0 Hdi 90hp 1999 only 189,000 and rising!!!!!!! Moved on to a new home
C3 1.4 petrol (SWMBO)
Xantia TD 1.9 Mk 2 Estate LX 1998 model over 210,000 miles now and still rising!!!!!!!!!!!!! now deceased 17/12/2010.
Will it rise and fall using the manual adjustment lever near the handbrake?
If it will, then quite possible the new clamp is nowhere near the right position on the anti roll bar. It can be a fiddle to get it in roughly the right place to start with.
Always a good idea to clean the linkage mechanism off the car, it can be removed without disconnecting hydraulic pipes on the height corrector.
Quick update, the HC was seized and with some lubrication and judicial use of an adjuster I have got it to move.
Next the spheres, I think I will leave these until next weekend when I can get access to a hydraulic ramp.
Kenny
C5 x7 2.0 HDi 160 hp Estate exclusive, moved on.
Xantia 2.0 Hdi 90hp 1999 only 189,000 and rising!!!!!!! Moved on to a new home
C3 1.4 petrol (SWMBO)
Xantia TD 1.9 Mk 2 Estate LX 1998 model over 210,000 miles now and still rising!!!!!!!!!!!!! now deceased 17/12/2010.
