Pauls HDI Xantia Exclusive.
-
- Posts: 8061
- Joined: 30 Dec 2004, 23:10
- x 71
Re: Pauls HDI Xantia Exclusive......
300 too chris i think and wont be long at this rate im going at.m
Sharing a pug 207 1.6 hdi Sw 16v.
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project
A very sad...
1994 XM 2.1 d auto
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project
A very sad...
1994 XM 2.1 d auto
-
- (Donor 2020)
- Posts: 1461
- Joined: 12 Dec 2009, 14:10
- x 29
Re: Pauls HDI Xantia Exclusive......
You're racking them up faster than me. I'm at 230k. The car did just fly through it's MOT on emissions though, very clean indeed so the engine has got a lot of life left in her.
2006 C5 HDi 170
1998 Xantia Activa S1
1971 D Special
2006 C3 1.6 HDi SX,
1998 Xantia Activa S1
1971 D Special
2006 C3 1.6 HDi SX,
A 1/3 of Team WFA 'Clarkson'CitroJim wrote: I'm a pink fairy
-
- Posts: 3980
- Joined: 10 Jul 2006, 12:11
- x 27
Re: Pauls HDI Xantia Exclusive......
Do you run anything thru her to keep her clean Chris or just long journeys?
-
- (Donor 2020)
- Posts: 1461
- Joined: 12 Dec 2009, 14:10
- x 29
Re: Pauls HDI Xantia Exclusive......
She is now only run on BP Ultimate and oil changes every 6k. She does about 70 miles a day of mixed A and B roads and I will take her to 4k every now and then to move things along a bit. I don't allow the dust to settle so to speak, I'm sure Paul's engine is in the same health.
2006 C5 HDi 170
1998 Xantia Activa S1
1971 D Special
2006 C3 1.6 HDi SX,
1998 Xantia Activa S1
1971 D Special
2006 C3 1.6 HDi SX,
A 1/3 of Team WFA 'Clarkson'CitroJim wrote: I'm a pink fairy
-
- Posts: 3980
- Joined: 10 Jul 2006, 12:11
- x 27
Re: Pauls HDI Xantia Exclusive......
Hmm, I tend to do about 10-15miles a day to work and back if that, and then 2 times a week a 20mile run to another office but tend to pootle along mostly, motorways spent behind lorries just relaxing and wafting along and runs on Sainsburys or Asda's diesel. I've put some two stroke in her a while ago to help burn things out and lubricate the pump parts but it only made about .5mpg difference. May find some cheap super diesel near me or some good bio to give it a try as i haven't used BioD for a long time now due to access and other projects ![Sad :(](./images/smilies/icon_sad.gif)
![Sad :(](./images/smilies/icon_sad.gif)
-
- Posts: 8061
- Joined: 30 Dec 2004, 23:10
- x 71
Re: Pauls HDI Xantia Exclusive......
BioD - which needs to be WELL MADE - has been approved by PSA for the 8v HDi engine.
I used some - was given a tank full - and there was quite a difference. She actually enjoyed the fuel..
I used some - was given a tank full - and there was quite a difference. She actually enjoyed the fuel..
Sharing a pug 207 1.6 hdi Sw 16v.
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project
A very sad...
1994 XM 2.1 d auto
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project
A very sad...
1994 XM 2.1 d auto
-
- Posts: 3980
- Joined: 10 Jul 2006, 12:11
- x 27
Re: Pauls HDI Xantia Exclusive......
There is always the crux Paul, finding well made stuff is hard. A few disco guys are looking at getting into it and i've said to one that if he gives me the odd barrel load i could give him some cash and a boot and trailer load of wood to repay him for each one, and being a disco thats a fair decent amount of wood ![Big Grin :D](./images/smilies/icon_e_biggrin.gif)
The last guy i used retired as HMRC and newbs were becoming a pain![Sad :(](./images/smilies/icon_sad.gif)
![Big Grin :D](./images/smilies/icon_e_biggrin.gif)
The last guy i used retired as HMRC and newbs were becoming a pain
![Sad :(](./images/smilies/icon_sad.gif)
-
- Posts: 8061
- Joined: 30 Dec 2004, 23:10
- x 71
Re: Pauls HDI Xantia Exclusive......
Well at last something to report on the xantia hdi..
Firstly 259,332 miles but yesterday the clutch release bearing started wineing.. ooohhhh it will last a while longer like that i thought... nope .. today on a day out it got worse and then pop the pedal went down and stopped down. Luckilly it was a 5th gear dual carrage way drive almost all the way home.. so for the first time with all the cars i have none are anygood. So im carless...
What to do.............. ?
![Arrow :arrow:](./images/smilies/icon_arrow.gif)
Firstly 259,332 miles but yesterday the clutch release bearing started wineing.. ooohhhh it will last a while longer like that i thought... nope .. today on a day out it got worse and then pop the pedal went down and stopped down. Luckilly it was a 5th gear dual carrage way drive almost all the way home.. so for the first time with all the cars i have none are anygood. So im carless...
What to do.............. ?
![Arrow :arrow:](./images/smilies/icon_arrow.gif)
![Arrow :arrow:](./images/smilies/icon_arrow.gif)
Sharing a pug 207 1.6 hdi Sw 16v.
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project
A very sad...
1994 XM 2.1 d auto
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project
A very sad...
1994 XM 2.1 d auto
-
- (Donor 2018)
- Posts: 2591
- Joined: 21 Aug 2009, 11:58
- x 43
Re: Pauls HDI Xantia Exclusive......
Jump on the train and come and sort mine out...... ![Laughing :lol:](./images/smilies/icon_lol.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)
Steve
2008 C6 2.7 Exclusive in Mativoire Beige with Vitali Leather.
2019 C5 1.6 Aircross Flair+ in Platinum Grey with Claudia Rimini Leather
http://c6owners.org/index.php
2008 C6 2.7 Exclusive in Mativoire Beige with Vitali Leather.
2019 C5 1.6 Aircross Flair+ in Platinum Grey with Claudia Rimini Leather
http://c6owners.org/index.php
-
- Posts: 8061
- Joined: 30 Dec 2004, 23:10
- x 71
Re: Pauls HDI Xantia Exclusive......
Well the choice is made...
just found a valeo brand new kit on ebay under peugeot 406... 49.95 plus post.. bank of mum here we come..![Big Grin :-D](./images/smilies/icon_e_biggrin.gif)
just found a valeo brand new kit on ebay under peugeot 406... 49.95 plus post.. bank of mum here we come..
![Big Grin :-D](./images/smilies/icon_e_biggrin.gif)
Sharing a pug 207 1.6 hdi Sw 16v.
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project
A very sad...
1994 XM 2.1 d auto
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project
A very sad...
1994 XM 2.1 d auto
-
- Posts: 3980
- Joined: 10 Jul 2006, 12:11
- x 27
Re: Pauls HDI Xantia Exclusive......
I know the feeling Paul! I have 4 and at least until Tuesday I have only 1 with an mot at the moment and hoping the xm passes but got worried this morning when i saw some black drops under front of the car ![Sad :(](./images/smilies/icon_sad.gif)
Done checking showed a rundown pipe that looks to come from a cup that sits from the oil filter. Omg what a stupid design and way to put an oil filter on a car in such a manner! Oh well at least it's easy to explain come the mot on Tuesday as I dropped it off today so fingers crossed for it and I pick the xantia up Monday so can get the abs sensor fitted and oil change done and drop it off for an mot when I go to pick the xm up so wish me luck for them both and keep your fingers crossed for me on both counts!!
![Sad :(](./images/smilies/icon_sad.gif)
Done checking showed a rundown pipe that looks to come from a cup that sits from the oil filter. Omg what a stupid design and way to put an oil filter on a car in such a manner! Oh well at least it's easy to explain come the mot on Tuesday as I dropped it off today so fingers crossed for it and I pick the xantia up Monday so can get the abs sensor fitted and oil change done and drop it off for an mot when I go to pick the xm up so wish me luck for them both and keep your fingers crossed for me on both counts!!
-
- Posts: 8061
- Joined: 30 Dec 2004, 23:10
- x 71
Re: Pauls HDI Xantia Exclusive......
Ha.. NONE of my other cars are any where NEAR getting an MOT!!
I DO wish you luck, I worked on the estate so thats also my judgement under the MOT man...
Anyway, a week without the car. The XM is in the work place, so AGAIN Ill have to find another spot to do the bloody thing.
Grrr it could of waited a week longer till the XM was done. I need to get a Heater Matrix for the XM yet too. Lucky I have the clutch!
I DO wish you luck, I worked on the estate so thats also my judgement under the MOT man...
![Surprised :o](./images/smilies/icon_surprised.gif)
Anyway, a week without the car. The XM is in the work place, so AGAIN Ill have to find another spot to do the bloody thing.
Grrr it could of waited a week longer till the XM was done. I need to get a Heater Matrix for the XM yet too. Lucky I have the clutch!
Sharing a pug 207 1.6 hdi Sw 16v.
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project
A very sad...
1994 XM 2.1 d auto
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project
A very sad...
1994 XM 2.1 d auto
-
- Posts: 3980
- Joined: 10 Jul 2006, 12:11
- x 27
Re: Pauls HDI Xantia Exclusive......Finally has broken..
Having been there earlier this year i know what its like not having a car when the FF first started giving me issues ![Sad :(](./images/smilies/icon_sad.gif)
Fingers crossed it gets sorted quickly
Do you think the matrix's go due to coolant not being done every 3 years and the fine particles building up in the system then cutting into the outer edges of the small pipes in them?
Hows the hunt for the XM matrix and HG going?
![Sad :(](./images/smilies/icon_sad.gif)
Fingers crossed it gets sorted quickly
Do you think the matrix's go due to coolant not being done every 3 years and the fine particles building up in the system then cutting into the outer edges of the small pipes in them?
Hows the hunt for the XM matrix and HG going?
-
- Posts: 8061
- Joined: 30 Dec 2004, 23:10
- x 71
Re: Pauls HDI Xantia Exclusive......Finally has broken..
I dont know what causes them to go but ive not needed one in the last 100k ... and ive no idea if she has ever had one fitted either..
Sharing a pug 207 1.6 hdi Sw 16v.
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project
A very sad...
1994 XM 2.1 d auto
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project
A very sad...
1994 XM 2.1 d auto
-
- Posts: 8061
- Joined: 30 Dec 2004, 23:10
- x 71
Re: Pauls HDI Xantia Exclusive......Finally has broken..
Set upon stripping the Xantia down to get it ready for putting the new clutch in when it arrives.
So, got the strip down done this morning.
Upon removal though, I discovered she WAS on her second clutch, NOT her original. There was a LUK clutch in there..
![Image](https://frenchcarforum.co.uk/forum/images/ext/2ba382635b32d811dc1bb1146b761671.jpg)
![Image](https://frenchcarforum.co.uk/forum/images/ext/7002f4b6abde4dbe53c5af49f3d2c0db.jpg)
![Image](https://frenchcarforum.co.uk/forum/images/ext/dd8dc87739ad8d722b41503c1761cad8.jpg)
![Image](https://frenchcarforum.co.uk/forum/images/ext/9930fe86916ace8f8803e821bb22aeee.jpg)
Well used hot pressure plate. Nice smooth Friction plate, which STILL did not Slip in operation, even with my trailer on the back! The release bearing HAD pulled out of the pressure plate - complete .. but the ball bearings in the release bearing had all broken loose inside it, and the bearing was very tight on the input shaft.
So, sitting now awaiting the new clutch.
So, got the strip down done this morning.
Upon removal though, I discovered she WAS on her second clutch, NOT her original. There was a LUK clutch in there..
![Image](https://frenchcarforum.co.uk/forum/images/ext/2ba382635b32d811dc1bb1146b761671.jpg)
![Image](https://frenchcarforum.co.uk/forum/images/ext/7002f4b6abde4dbe53c5af49f3d2c0db.jpg)
![Image](https://frenchcarforum.co.uk/forum/images/ext/dd8dc87739ad8d722b41503c1761cad8.jpg)
![Image](https://frenchcarforum.co.uk/forum/images/ext/9930fe86916ace8f8803e821bb22aeee.jpg)
Well used hot pressure plate. Nice smooth Friction plate, which STILL did not Slip in operation, even with my trailer on the back! The release bearing HAD pulled out of the pressure plate - complete .. but the ball bearings in the release bearing had all broken loose inside it, and the bearing was very tight on the input shaft.
So, sitting now awaiting the new clutch.
Sharing a pug 207 1.6 hdi Sw 16v.
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project
A very sad...
1994 XM 2.1 d auto
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project
A very sad...
1994 XM 2.1 d auto