Heater blower area lights out

This is the Forum for all your Citroen Technical Questions, Problems or Advice.

Moderator: RichardW

xantiagreen
Posts: 393
Joined: 13 Sep 2013, 04:45
x 2

Heater blower area lights out

Post by xantiagreen »

Hi, How do I get the bulbs at the back of the heater control unit, bottom bulbs are dim and top are dead also how do i get behind the hazards/ aircon and alarm override square switches to change the bulbs/led's.

Thanks in advance.
Faz

90 Ax 1.0 Red
90 Bx 1.7 TZD Green
92 Bx Gti BRG
90 Bx 16v Cream
96 Xantia 2lt 16v Sx Olive green
01 Xantia 110 Hdi
Storm Grey (SOLD 4/11/18)

Temporarily driving Polo 1.9sdi

All I want is a Bx Gti or 16v!
User avatar
Skull
Donor 2024
Posts: 925
Joined: 02 Aug 2013, 13:35
x 221

Re: Heater blower area lights out

Post by Skull »

I've just done this on my Xantia - the Haynes manual is very vague on this job. I ended up uncliping the front of the fascia :oops: which is a nightmare to replace correctly without it repeatedly spitting out the rubber baffles on the slider controls.

When you get access to the unit there is a black cover on the top part which clips off 2 large clips either side. This will allow you to see the internal mechanism. The bulb holder is towards the front of the opening you now have. You can then move the top 2 slider controls to give you the best clearance for the tandem bulb holder to be removed - which unclips and will come out with perseverance (the 2 bulbs are £4 each from Citroen :shock: )
On my 4th Citroën Xantia (X2 HDi (110))
Citroën sAXo Memphis Mk II
Gone
Xantia x3 (2.0i TCT Activa)(2.1 TD SX)(1.9 TD Estate)
Xsara HDi VTR Coupe / Saxo 1.1i / BX 1.9 d / 4 x AX's (1.4D /1.5D)
2 x 406 (1.9 TD Estate/2.1 TD Saloon) 405 1.9 D Estate 306 1.9 XTDT Hatch