106 Diagnostic socket

chris1000 · Unread post by **chris1000** » 28 Aug 2004, 01:15

I have poor performance from my 1997 1.1 106. The Engine management warning light keeps coming on indicating a problem.
I can't find the diagnostic socket, any ideas.

PowerLee · Unread post by **PowerLee** » 28 Aug 2004, 15:44

Its green & has 2 wires running from it, From memory have a poke around behind the drivers side headlight area.

wheeler · Unread post by **wheeler** » 28 Aug 2004, 17:41

the diagnostic socket changed to a 16 pin EOBD socket around 97/98 so it may be the later type which is just next to the bonnet release lever under the glovebox.

chris1000 · Unread post by **chris1000** » 28 Aug 2004, 18:21

It is the 16 pin type next to bonnet release, Any idea which terminal I attach a fault code reader

PowerLee · Unread post by **PowerLee** » 28 Aug 2004, 19:05

Click the link, Then on Diagnostic at the top, Then scroll down the list on the left untill you see where it says On Board Diagnostic & then Click on Diagnosic Socket Pin-Out
http://www.peugeotlogic.com/workshop/base/workshop.htm

docs brother · Unread post by **docs brother** » 27 Sep 2004, 18:50

chris1000 if you get to find out what's wrong with your pug I'd be interested because my '94 1.1 is also having similar symptons. Although my warning light doesn't stay on, the running is a bit erratic i.e the revs go up and down at idle. It also feels like it's misfiring and doesn't seem as nippy. A main dealer once said it was probably the catalytic convertor, then suggested the ECU was gone so wanted to charge a small fortune to 'try out a replacement', but it's always managed to pass emissions on the MOT for the last 3 years so can't be running that badly.