Electric Adjust Seats - Fuse failure

This is the Forum for all your Peugeot Technical Questions, Problems or Advice.
addo
Sara Watson's Stalker
Posts: 7098
Joined: 19 Aug 2008, 12:38
x 95

Electric Adjust Seats - Fuse failure

Unread post by addo »

Had one pop this week past - unusual, or a commonplace occurrence?

Most fuses in the board looked original (DAV type). I slotted another 30A unit in, and so far no pop.

Anyone care to share similar - or differing - experiences they may have had?

Cheers, Adam.
User avatar
AndersDK
Posts: 6060
Joined: 21 Feb 2003, 04:56
x 1

Unread post by AndersDK »

This is an indication that the motor is working on its limits.
Probably due to dry guide rails.

The fuse should only blow if the motor is stalled for some time.

If 2 motors are fed off the same fuse, it may be a totally different story though.
Then it could be a delay in a functional switch or relay contact set, causing the circuit to overload, if both motors are engaged.
Anders (DK) - '90 BX16Image