ZX thingy next to the handbrake

teabag · Unread post by **teabag** » 31 Mar 2004, 18:57

Hi,
a bit of a dumb question. When I adjusted my handbrake recently I took off the cover. There was a white box bolted to the bracker with a large connector on it and several wires in a loom going towards the back of the car.
Just curious, but what is it.

tomsheppard · Unread post by **tomsheppard** » 31 Mar 2004, 19:06

Most likely to be the central locking unit.

AndersDK · Unread post by **AndersDK** » 31 Mar 2004, 19:08

The C/L control unit ?
(not the remote reciever)
- used to reside exactly in that location on BX series 2.

AndersDK · Unread post by **AndersDK** » 31 Mar 2004, 19:10

Ah - cheers Tom [8D]

sooty · Unread post by **sooty** » 01 Apr 2004, 01:12

I think its the collision sensor for the air bag system.

VLL · Unread post by **VLL** » 01 Apr 2004, 03:12

Isn't it something to do with the seatbelt pre-tensioners?

teabag · Unread post by **teabag** » 01 Apr 2004, 15:02

Thanks for the replies. It must be the central locking as I don't have anything fancy like airbags or seatbelt tensioners.

rabenson · Unread post by **rabenson** » 01 Apr 2004, 19:09

Definitely is the central locking controller - if you take the cover off you can see the relays operate as you lock / unlock.
Ron

ZXturbo_Aura · Unread post by **ZXturbo_Aura** » 01 Apr 2004, 19:56

it will defo be the central locking unit if it has all orange wires with two heavier gauge yellow wires if i remember correctly,
Dan

andymp · Unread post by **andymp** » 09 Apr 2004, 23:05

If it's the same as mine, It's the seat belt pre-tensioner!!! Don't mess with it!