Help and tools

uhn113x · Unread post by **uhn113x** » 17 Mar 2004, 12:38

This topic seems to have elicited an excellent response - I wonder where we should take it now? If one of us requires assistance in the middle of nowhere and we do not have our bluetooth-enabled laptop in the car [;)] what we need is a printed list. Would it be possible to somehow gather all our data in a similar format, and stick it in a downloadable PDF ? I may be able to help here

shaunthesheep · Unread post by **shaunthesheep** » 18 Mar 2004, 06:07

Location : Ipswich, suffolk
Tools available : square sump plug, pleades sphere removal tool, brake caliper wind back tool, torx bits most sizes, 2 tonne axle stands, 2 tonne jack.
other details : beer & assistance if needed.
misc : xantia bits, no longer needed - manual transmission fluid, rear trailing arm boots X 2, rocker cover studs & caps, white top up paint.

Unread post by **Jon** » 18 Mar 2004, 13:59

Ok, I am going to let this one run for a bit and then copy all interested party's details into a a PDF Doc. At this stage we're going to need names, phone numbers that sort of thing. In view of this its probably best that the PDF is not available for general download and that it has to be emailed out by a Moderator or Admin.
Please let me know what you think.

shaunthesheep · Unread post by **shaunthesheep** » 18 Mar 2004, 16:10

jon,
sure you can have my name, phone number etc, just drop me an email.
i do aggree with have the docment NOT on general download, it saves allsorts of hastle etc..
dom

DLM · Unread post by **DLM** » 18 Mar 2004, 20:09

Fine by me too...I'd been wondering about the best means to make it available without provoking a spamfest or unsolicited calls.

Kowalski · Unread post by **Kowalski** » 18 Mar 2004, 21:52

<blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by DLM

Fine by me too...I'd been wondering about the best means to make it available without provoking a spamfest or unsolicited calls.
<hr height="1" noshade id="quote"></blockquote id="quote">
How about making a version freely available with very general locations and names etc i.e. not full details and make the full detailed version available via an e-mailed request. That way you can see whether somebody is in your area without having to hassle the forum admins.

tomsheppard · Unread post by **tomsheppard** » 18 Mar 2004, 21:59

The number of replies just goes to show what a willing and generous lot we have on this forum.
I have received all sort of help and advice on here. There is a huge network of support for Citroen owners that I just didn't know existed 18 months ago. I reckon that Citroens are probably the best supported cars anywhere thanks to the existence of sites like this. I bet it is harder to get tech help for a Ford or Vauxhall- Thanks everybody!

JohnD · Unread post by **JohnD** » 18 Mar 2004, 23:41

It's a great idea - Here's my list:-
Sphere removal tool
5 various filter grips
Towing 'A' frame with 50mm cup
Set of ramps
3 trolley jacks
Various 2 and 3 legged pullers
Equipment for removing hub nuts
Hoist
Front spring compressors
Welder
Situation: London/Surrey border.

pwatson · Unread post by **pwatson** » 18 Mar 2004, 23:47

You can add me to the list I'm a useless mechanic though I did replace an octopus once and have donoe numerous spheres. Have a decent toolbox (including a big socket which fits the end nut on drive shafts, long bar and piece of scaffolding to go on that!) and a shed full of various bits from a Mark1 19RD. What I could do really well is stand watching while someone else works! I'll supply copious quantities of cheap French beer, wine and fags!!
Located in East Midlands

InSaaNiTy · Unread post by **InSaaNiTy** » 19 Mar 2004, 02:56

Location: Liverpool
Tools Available: 1 screw driver, a kitchen knife, a bottle of coolant and radio removal prongs lol
Other Details: Can fit window wipers, radios, change oil, change wheel, car speakers lol
Misc: Nope
Sorry I had to add this, am useless with cars as you can see

vanny · Unread post by **vanny** » 21 Mar 2004, 01:04

Any body in the wirral area got a hydraulic press i can use tomorrow? Ive snapped more bolts today than i care to think of pulling a new bearing into a hub

Answers on a post card (before sunday evening) to [email protected]
spanx

DoubleChevron · Unread post by **DoubleChevron** » 22 Mar 2004, 09:11

Yeah,
I have a 12ton press you can use, I'll even supply the homebrew to drink while your doing some pressing [:D]
seeya,
Shane L.
PS: I am a 'little' drive away though [:o)]

vanny · Unread post by **vanny** » 22 Mar 2004, 19:27

Sorted, got the local garage to do it. And my car partner in crime is getting one next month!

noz · Unread post by **noz** » 23 Mar 2004, 02:19

Location:
Near Falkirk, Stirlingshire, Scotland
Tools Available:
Sphere Pressure Testing Rig
Sphere Recharging Rig
Sphere Removal Tool
Pipe making kit for 3.5, 4.5 and 6.3mm piping
35mm socket and 3/4" drive bar with scaffold pole for those centre nuts
Ball joint splitter
Oscilloscope
Multimeter
OxyCetylene kit
Miriad of workshop Tools
Other Details:
Large Garage usually filled with CX's. Beer, sympathy and more beer.
Misc:
Various CX bits & pieces, few XM spares
If I can be of assistance in Central Scotland drop me a line.
Cheers
Norrie[8D]

shug · Unread post by **shug** » 25 Mar 2004, 02:37

ok i am an air con engineer wif access 2 valves and fittings etc
so for re-gassing your air con give me a shout.
Location central scotland.