C5 HDI still wont start properly...Help

crosser69 · Unread post by **crosser69** » 06 May 2010, 20:36

I recently put a post on,c5 2.0 hdi 52 plate would not start unless you use a bit of easy start then it would cut out if you did not keep revs on,then it would tick over for a bit and then stop and then fail to start.
I have now changed the hp pump and replaced the timing belt as it was off anyway.
Has anyone else got any ideas,i can hear the pump in the tank running but could i still have a faulty in tank pump or have i got a fauly pressure sensor?

Unread post by **citroenxm** » 06 May 2010, 21:50

Does the Engine diagnostic light come on at all when she stalls??

IF it does you have half a good chance of the Lexia picking up the fault..

Other wise you can be chasing forever replacingall sorts of sensors.. Is the cam position sensor connected?? Next to cam belt cover on top..

There could be a number of things causing a non runner..

Paul

crosser69 · Unread post by **crosser69** » 06 May 2010, 22:22

no engine management light comes on,i think everything is plugged in as it should be,i dont know anyone with a lexia machine although im thinking about pushing it around to my mates and getting the r.a.c to come out to have a look

Unread post by **citroenxm** » 07 May 2010, 10:03

Where art thou located???

Paul

crosser69 · Unread post by **crosser69** » 07 May 2010, 21:00

im in durham,if anyone is near to where i live and can shed some light on it then that would be a great help