Xantia 2.0 Hdi. Intermittent Stop and light on Temp Gauge

jcdel · Unread post by **jcdel** » 18 Apr 2010, 12:17

I'm relying on you guys again.The stop sign and red panel light intermittently flash on and off.(Temp Gauge).I have noticed that this sometimes happens on bends and roundabouts etc.All water levels are OK etc.Thanks for any help.

Unread post by **myglaren** » 18 Apr 2010, 12:26

Loose connection on the water level sensor I imagine.

Clogzz · Unread post by **Clogzz** » 18 Apr 2010, 13:31

With the temperature gauge light on, isn’t that our old mate the brown sensor ?
If the cooling fans are going at full speed when the lights flash, it’s usually caused by a loose brown sensor connector.

jcdel · Unread post by **jcdel** » 18 Apr 2010, 20:04

Thanks guys I will check tomorrow.On reflection the fans have come on recently for no apparent reason.Still the middle of winter in east Yorkshire.

DickieG · Unread post by **DickieG** » 18 Apr 2010, 20:39

Take a look at this thread.

Unread post by **citroenxm** » 18 Apr 2010, 20:57

Confirmed... I also had this headache with a W 2000 Xantia HDi 110bhp..

STOP and the Red Coolant light... I swapped sensors, and level sender.. however, as already said in that thread it turned out to be one of the Fan relays located between the Fans, behind the cover under the bonnet...

I also connected the Lexia to find it reporting a "Short Curcuit in Slow speed Fans"

After pulling relays out cleaning contacts etc, and re connecting it all up, Fans worked both speeds and the Light stopped flashing.

Paul

DickieG · Unread post by **DickieG** » 18 Apr 2010, 21:36

The repair on my HDi is still good over a year later