Stupid question

rpaco · Unread post by **rpaco** » 12 Oct 2009, 21:55

In which suspension position is there the least pressure on the seals of cylinders valves and bits.
I'm guessing its totally up or totally down.

Unread post by **CitroJim** » 12 Oct 2009, 22:03

Down on low. In the rears especially, practically no pressure at all.

That is not quite so true of the accumulator though.

HDI · Unread post by **HDI** » 12 Oct 2009, 22:06

The way I understand it , there is always pressure in the hydraulic system , but if the suspension is fully lowered there is no hydraulic load in the suspension cylinders.