Heater/demister fan

This is the Forum for all your Citroen Technical Questions, Problems or Advice.
koppite34
Posts: 13
Joined: 02 Oct 2009, 16:45

Heater/demister fan

Unread post by koppite34 »

The fan you control for heating and demister etc wont come on sometimes it does but most of the time it is not and coming up to winter those misty windows will be back but no blower to get rid!.....Is it the relay switch? what to do and cost please!!! Oh its a 1999 xantia
User avatar
CitroJim
A very naughty boy
Posts: 54549
Joined: 30 Apr 2005, 23:33
x 8058

Unread post by CitroJim »

Check the connections on the blower assembly, especiaslly the big red and grey ones, both on the 4 way plug and the two singl plugs that connect to the motor. The fan can consume up to 30A on full and the connectors are known to run hot, loose their temper and fail to make a good contact.

The motor brushes could also be worn. Check by looking for voltage at the motor connectors. If you find volts there, the brushes have had it.

If so, source a replacement motor from a scrap vehicle as provide they're from an aircon car, they're all the same.
Jim

A bit of a Citroen AX fan...
koppite34
Posts: 13
Joined: 02 Oct 2009, 16:45

Fan

Unread post by koppite34 »

thanks for that what do i look for when i open the bonnet so i can see what to look for? thanks for that.
User avatar
CitroJim
A very naughty boy
Posts: 54549
Joined: 30 Apr 2005, 23:33
x 8058

Re: Fan

Unread post by CitroJim »

koppite34 wrote:thanks for that what do i look for when i open the bonnet so i can see what to look for? thanks for that.
Don't open the bonnet! Instead get your head down in the passenger footwell and undo the five or so Torx screws that hold the fabric trim on under the glovebox. Under her you'll find the blower motor assembly, the pollen filter and the connectors/cables I referred to earlier...
Jim

A bit of a Citroen AX fan...
HDI
Posts: 1468
Joined: 22 Sep 2009, 15:46
x 7

Unread post by HDI »

The blower fan is above the passenger footwell beneath a trim cover attached with 2 torx head screws and 5 or 6 plastic allen head trim screws.
Now using '00 Xantia LX HDI, pov spec :(
My past Citroens :-
'00 Xantia SX HDI, now dead due to accident :(
'99 Xantia HDI 110 Exclusive, RIP :(
'97 Xantia TD SX
'96 Xantia TD LX
'96 ZX TD
'89 BX TD
'88 AX GT
'79 CX2400 Pallas (scrapped :( )
& a couple of Peugeots !
HDI
Posts: 1468
Joined: 22 Sep 2009, 15:46
x 7

Unread post by HDI »

u beat me to that !! #-o
Now using '00 Xantia LX HDI, pov spec :(
My past Citroens :-
'00 Xantia SX HDI, now dead due to accident :(
'99 Xantia HDI 110 Exclusive, RIP :(
'97 Xantia TD SX
'96 Xantia TD LX
'96 ZX TD
'89 BX TD
'88 AX GT
'79 CX2400 Pallas (scrapped :( )
& a couple of Peugeots !
User avatar
CitroJim
A very naughty boy
Posts: 54549
Joined: 30 Apr 2005, 23:33
x 8058

Unread post by CitroJim »

HDI wrote:u beat me to that !! #-o
Happens a lot around here :lol: :lol: :lol: I had the reverse happen just a few moments ago with John Plum's balljoint thread.

Still better two replies saying much the same than none at all!!!
Jim

A bit of a Citroen AX fan...
koppite34
Posts: 13
Joined: 02 Oct 2009, 16:45

thanks

Unread post by koppite34 »

Thanks to your replies....good job got people who are in the know unlike me eh..lol Thanks i will let you know how i go......pray for me.lol