Hello to all.
Our 406 won't rev beyond 1200 rpm.
It's a 2.0 hdi, 110.
Onscreen display is faded, so no message.
Our lexia is out of action at the moment.
Cheap elm227 Bluetooth reader connected to our phone shows no error messages.
Disconnected the MAF, no difference.
Drained some diesel out of the filter housing to do a water test.
Any suggestions, apart from the obvious of getting our Lexia to work....
BTW.....has anyone tried PSA-COM aka Superscan ?
406 won't rev
-
- (Donor 2016)
- Posts: 414
- Joined: 07 Aug 2013, 13:43
- x 41
406 won't rev
Jumper 2.5d
406 Phase 2 Estate, Hdi
Fiat 500 (2009)
1997 Audi A3 tdi
Peugeot 205 td
Fordson Major Tractor
Nuffield 460 tractor
JCB 3cx
Fordson Super Dexta
Massey Ferguson 65
406 Phase 2 Estate, Hdi
Fiat 500 (2009)
1997 Audi A3 tdi
Peugeot 205 td
Fordson Major Tractor
Nuffield 460 tractor
JCB 3cx
Fordson Super Dexta
Massey Ferguson 65
-
- Donor 2024
- Posts: 798
- Joined: 06 Jun 2023, 15:26
- x 197
Re: 406 won't rev
Could be anything, eg carpet under the accelerator pedal so it cannot go fully down, blocked air filter, blocked exhaust, air ducting loose, ....
-
- (Donor 2016)
- Posts: 414
- Joined: 07 Aug 2013, 13:43
- x 41
Re: 406 won't rev
Hello and thank you for the reply. I am leaning in the direction of a restricted or blocked catalytic converter. Will try to disconnect the exhaust from the turbo to see if it revs more......
Jumper 2.5d
406 Phase 2 Estate, Hdi
Fiat 500 (2009)
1997 Audi A3 tdi
Peugeot 205 td
Fordson Major Tractor
Nuffield 460 tractor
JCB 3cx
Fordson Super Dexta
Massey Ferguson 65
406 Phase 2 Estate, Hdi
Fiat 500 (2009)
1997 Audi A3 tdi
Peugeot 205 td
Fordson Major Tractor
Nuffield 460 tractor
JCB 3cx
Fordson Super Dexta
Massey Ferguson 65