clutch bearing and fork set up

pienmash · Unread post by **pienmash** » 05 Jun 2004, 17:24

any one got any tips on getting the fork and clutch bearing to marry up,i replaced clutch but having trouble gettin the bearing to marry into the fork,many thanks john

TheWorker · Unread post by **TheWorker** » 01 Jul 2004, 02:57

if the bearing is seperate from the clutch, it should just clip on to the arm. if the bearing is attached to the clutch, the arm needs to be at about 45 degrees or so before the box goes in, get another person to line it up at the final push.