3008 2017 1.6bhdi eat 6 problem without solution

This is the Forum for all your Peugeot Technical Questions, Problems or Advice.

Moderator: RichardW

Post Reply
Dimos_g
Posts: 1
Joined: 07 Nov 2021, 21:33
Location: Athens,Greece
My Cars: Peugeot 3008 1.6 bhdi eat6

3008 2017 1.6bhdi eat 6 problem without solution

Post by Dimos_g »

I am writing you from Greece because am trying to find somebody else in the world with a similar problem that the factory is not capable to solve it (3 months in a official reseller and repair)
My car has 53.000 km and I have a huge loss of power and very high consumption.I have dyno meter the car and the result was 78ps...
The consumption is more than 10.5litres/100km
And there is no malfunction in ecu without any errors
We have checked dpf,adblue,calalyst,turbocharger,all the hoses and the diesel injection system
We have the normal readings in ecu for boost in the turbocharger with 1.55 overboost but we don't have the power.
Does anybody ever had anything similar??
Online
User avatar
Paul-R
Donor 2023
Posts: 6931
Joined: 07 May 2009, 16:24
Location: Wirral, NW England; Vaucluse 84, France
Lexia Available: Yes
My Cars: 2015 1.6 Blue HDi 120 Peugeot 308 Active SW
2013 2.0 HDi 163 C5 Exclusive Tourer
2003 2.0 HDi 110 C5 Exclusive Estate (Gone)
2001 2.0 HDi 90 Xsara Estate (Gone)
x 1378

Re: 3008 2017 1.6bhdi eat 6 problem without solution

Post by Paul-R »

Hello and welcome to the forum.

The first thing that strikes me is that you haven't checked the MAF. These can sometimes be cleaned if oil has built up on the wires but this needs to be done carefully. Replacement might be required if it at fault and can't be cleaned.
As I get older I think a lot about the hereafter - I go into a room and then wonder what I'm here after.

Inside every old person is a young person wondering what the hell happened.

"Trying is the first step towards failure" ~ Homer J Simpson​
Post Reply