Good evening im a newbie so please be gentle....
I have updated the firmware on my Smeg unit and since then i have lost the car symbol when reversing, the bars appear and are as good as they ever were.
I have diagbox and have previously programmed new keys so I can find my way around it once I know where to look I am more than happy to make the adjustments.
its on a 2008 Allure 2016
Thanks,
Lee.
Reverse sensor calibration
Moderator: RichardW
-
GiveMeABreak
- Forum Admin Team
- Posts: 37396
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5740
Re: Reverse sensor calibration
Hi Lee
From what I can see, there is nothing to configure ECU wise, so long as 1) Presence of front proximity sensors, 2) Type of Gearbox, and 3) Whether the presence of semi-automatic function is present or not.
Whether there is another system for calibration of the rear camera or the system I can't say.
From what I can see, there is nothing to configure ECU wise, so long as 1) Presence of front proximity sensors, 2) Type of Gearbox, and 3) Whether the presence of semi-automatic function is present or not.
Whether there is another system for calibration of the rear camera or the system I can't say.
Please Don't PM Me For Technical Help
Marc
Marc